Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X800S
The AirTAC Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X800S is a genuine double-acting DOUBLE-ROD air cylinder: the Ø25mm piston rod extends from BOTH end caps, giving equal effective area — and therefore equal force — in push and pull. Ø100mm bore, 800mm stroke, PT1/2 ports and adjustable end cushioning.
- BoreØ100 mm
- Rod (both ends)Ø25 mm
- Stroke800 mm
- Port sizePT1/2
- Rod configDouble rod (through)
- CushionAdjustable, 29 mm
About the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X800S
The B06-SCD100X800S is an AirTAC double-acting, double-rod cylinder where the B06- prefix designates it as a battery-manufacturing dedicated variant of the standard SCD100X800S. Mechanically, it is identical to the base model, featuring a 100mm bore and an 800mm stroke. The through-rod design yields identical thrust and retraction force, providing 3681 N in both directions at 0.5 MPa and 6626 N at 0.9 MPa.
Because the Ø25mm piston rod passes through both end caps, the unit provides superior rod guidance and anti-rotation characteristics compared to a single-rod cylinder. This specific configuration includes a built-in magnet (the S suffix) for mounting CMSG, DMSG, or EMSG sensors along the 263mm body length A(SCD). The 29mm adjustable cushions at each end absorb kinetic energy, though they do not lock the piston if air pressure is lost.
Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X800S Technical Specifications
| Model | Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X800S |
|---|---|
| Series | SCD double-rod tie-rod cylinder |
| Bore size | Ø100 mm |
| Rod diameter | Ø25 mm (both ends) |
| Stroke | 800 mm |
| Rod configuration | Double rod — rod through both caps |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SCD (double-rod) datasheet. Because the rod runs through both caps, the effective area is (bore² − rod²) in both directions. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm, double rod)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | 5154 N |
| Max (@1.0 MPa) | 751 kgf | |
Push and pull are EQUAL on a double-rod cylinder — both chambers lose the rod area, so effective area = (bore² − rod²) each way. Actual usable force is lower than theoretical due to friction and back-pressure; size with a safety margin.
Model Code: Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X800S
| SCD | Double-rod tie-rod cylinder series (rod out both ends). |
|---|---|
| 100 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related types: SC (single rod), SCJ (adjustable stroke), SCT (multi-position). SCD mounting: Basic, FA, LB, TC, TCM1. Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X800S Is Used
Battery Cell Stacking
Drives dual-sided stacking plates in prismatic cell assembly, utilizing the equal push and pull force to precisely layer battery materials without rotational drift.
Module Transfer Shuttle
Moves battery modules between conveyor lanes with tooling mounted to both rod ends, allowing simultaneous push and pull actions for high-throughput pack lines.
Tab Welding Positioning
Positions battery tabs for laser welding using the built-in magnet and rear rod extension for mounting stroke-end flags, ensuring precise sensor triggering.
Is the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X800S the Right Cylinder?
Select this 100mm bore when your battery assembly line requires substantial equal bidirectional force (3681 N at 0.5 MPa) over a long 800mm travel. If your application only needs one-sided pushing, stepping down to the single-rod AirTAC SC100X800 saves space and weight. Conversely, if side loads are high on this long 800mm stroke, a dedicated guided cylinder is recommended over relying solely on the through-rod for support.
To replace this unit, match the 100mm bore, 800mm stroke, PT1/2 port thread, basic mounting style, and the -S magnet option. Note that on an 800mm stroke, the unsupported rod length makes the cylinder susceptible to bending under heavy lateral loads; always use external guides or linear rails to support the tooling.
Double-rod checklist
- ✓ Need equal force / speed both directions?
- ✓ Rear rod for tooling, stopper or sensor flag?
- ✓ Better rod guidance / anti-rotation?
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Keep BOTH rod ends clear of side load and interference.
- check Adjust end cushion screws for smooth stops.
- check Use SCD mounting accessory (FA / LB / TC / TCM1).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X800S FAQ
The B06- prefix indicates this is an AirTAC cylinder dedicated to battery-manufacturing applications. It is mechanically identical to the standard SCD100X800S, offering the same 100mm bore, 800mm stroke, and 3681 N equal push/pull force at 0.5 MPa.
No, the 29mm adjustable cushions only decelerate the piston near the stroke ends. If the battery line application must hold a load without live air pressure, you must use an external mechanical lock, rod brake, or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SCD Double-Rod Cylinders
Request a Quote for Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X800S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.