Airtac SC100 Standard Cylinder SC100X800
The AirTAC Airtac SC100 Standard Cylinder SC100X800 is a genuine double-acting standard air cylinder with a Ø100mm bore and 800mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke800 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X800
The SC100X800 is a double-acting tie-rod cylinder delivering 3927 N of push force at 0.5 MPa (7068 N at 0.9 MPa). Its 100 mm bore and 800 mm stroke suit long linear movements in material handling and industrial automation where substantial thrust is needed.
This model features a 25 mm diameter piston rod, PT1/2 ports, and an adjustable air cushion (29 mm length) to decelerate the load smoothly. The total body length A is 188 mm, giving an extended length of approximately 988 mm. Operating pressure ranges from 0.15 to 1.0 MPa with a speed of 30-800 mm/s.
Airtac SC100 Standard Cylinder SC100X800 Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X800 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X800
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X800 Is Used
Pallet Transfer
Moves heavy pallets across roller conveyors with 3927 N of push force, handling sustained transfer cycles in distribution centres.
Press-Fit Assembly
Provides the controlled 7 kN thrust at 0.9 MPa needed for pressing bearings or bushings into large housings on an assembly line.
Baler Compaction
Drives the compaction plate in recycling balers, using the full 800 mm stroke to compress cardboard or plastics into dense bales.
Is the Airtac SC100 Standard Cylinder SC100X800 the Right Cylinder?
For higher force, step up to the SC125 bore (6136 N at 0.5 MPa). If 3927 N is more than needed, the SC80 bore provides 2513 N at the same pressure. At 800 mm stroke, the unsupported rod is extended significantly; use an external guide or a guided cylinder if the load applies any side force, as long slender rods are vulnerable to bending and bearing wear.
To replace an existing unit, match five points: 100 mm bore, 800 mm stroke, PT port thread, basic mount (no bracket), and no magnet. Only an AirTAC SC of identical configuration guarantees the same tie-rod dimensions and cushion performance.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X800 FAQ
At 0.5 MPa, push force is 3927 N and pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
No. The 25 mm rod extended 800 mm is not designed to support side loads. Applying a lateral force will bend the rod and damage the piston bearing. Always use an external linear guide or a guided cylinder for side-loaded applications.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X800
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.