Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X200
The AirTAC Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X200 is a genuine double-acting DOUBLE-ROD air cylinder: the Ø12mm piston rod extends from BOTH end caps, giving equal effective area — and therefore equal force — in push and pull. Ø32mm bore, 200mm stroke, PT1/8 ports and adjustable end cushioning.
- BoreØ32 mm
- Rod (both ends)Ø12 mm
- Stroke200 mm
- Port sizePT1/8
- Rod configDouble rod (through)
- CushionAdjustable, 21 mm
About the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X200
The B06-SCD32X200 is an AirTAC double-acting, double-rod cylinder where the B06- prefix designates it as a battery-manufacturing dedicated variant of the standard SCD32X200. Mechanically, it is identical to the base model, featuring a 32 mm bore and 200 mm stroke. Because the piston rod passes through both end caps, the effective area is identical in both chambers, yielding an equal push and pull force of 483 N at 0.7 MPa.
This symmetric design is highly valued on cell stacking and module handling lines. The Ø12 mm rod protrudes from both ends, allowing engineers to mount tooling or a sensor flag at the rear while driving the primary load up front. It features adjustable cushions with a 21 mm length to decelerate the piston smoothly at stroke ends, and the body length A(SCD) is 187 mm.
Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X200 Technical Specifications
| Model | Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X200 |
|---|---|
| Series | SCD double-rod tie-rod cylinder |
| Bore size | Ø32 mm |
| Rod diameter | Ø12 mm (both ends) |
| Stroke | 200 mm |
| Rod configuration | Double rod — rod through both caps |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SCD (double-rod) datasheet. Because the rod runs through both caps, the effective area is (bore² − rod²) in both directions. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm, double rod)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 70 kgf | |
Push and pull are EQUAL on a double-rod cylinder — both chambers lose the rod area, so effective area = (bore² − rod²) each way. Actual usable force is lower than theoretical due to friction and back-pressure; size with a safety margin.
Model Code: Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X200
| SCD | Double-rod tie-rod cylinder series (rod out both ends). |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related types: SC (single rod), SCJ (adjustable stroke), SCT (multi-position). SCD mounting: Basic, FA, LB, TC, TCM1. Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X200 Is Used
Battery Cell Stacking
Drives a dual-ended stacking plate to press and align prismatic cells, using the equal push/pull force to maintain consistent pressure during electrode assembly.
Module Shuttle Transfer
Mounts a stopper on the rear rod and a pusher on the front to shuttle battery modules between conveyor belts without needing a second actuator.
Non-Rotating Tab Welding
Carries a welding head on one end and a counterweight on the other, leveraging the double-rod guidance to prevent rod twist during tab welding operations.
Is the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X200 the Right Cylinder?
Choose this 32 mm bore when your battery assembly fixture requires exactly 483 N of thrust and retraction force at 0.7 MPa. If your application needs less force, stepping down is not an option in the SCD range, but if you need significantly more power, the 40 mm bore offers 739 N at the same pressure. If you only need tooling on one side and want a shorter overall envelope, the single-rod AirTAC SC32X200 is a better fit. For heavy side loads, a guided cylinder is recommended over a through-rod design.
When ordering a replacement, verify a 5-point match: 32 mm bore, 200 mm stroke, PT1/8 port thread, basic mounting (or an SCD-compatible accessory like F-SC32LB), and no built-in magnet. At 200 mm stroke, side load on the unsupported rod is moderate, but always use external guides if pushing heavy battery trays.
Double-rod checklist
- ✓ Need equal force / speed both directions?
- ✓ Rear rod for tooling, stopper or sensor flag?
- ✓ Better rod guidance / anti-rotation?
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Keep BOTH rod ends clear of side load and interference.
- check Adjust end cushion screws for smooth stops.
- check Use SCD mounting accessory (FA / LB / TC / TCM1).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X200 FAQ
The B06- prefix indicates this is a battery-manufacturing dedicated variant of the standard AirTAC SCD32X200. It is mechanically identical to the base model, offering the same 32 mm bore, 200 mm stroke, and 483 N equal push/pull force at 0.7 MPa, with no changes to physical dimensions or seals.
A double-rod cylinder provides equal force in both directions (483 N at 0.7 MPa here) because the rod area is subtracted from both chambers. The through-rod design also allows mounting rear tooling or sensors, offers better anti-rotation resistance, and balances bearing wear better than a single-rod version.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SCD Double-Rod Cylinders
Request a Quote for Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X200
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.