Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X200S
The AirTAC Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X200S is a genuine double-acting DOUBLE-ROD air cylinder: the Ø12mm piston rod extends from BOTH end caps, giving equal effective area — and therefore equal force — in push and pull. Ø32mm bore, 200mm stroke, PT1/8 ports and adjustable end cushioning.
- BoreØ32 mm
- Rod (both ends)Ø12 mm
- Stroke200 mm
- Port sizePT1/8
- Rod configDouble rod (through)
- CushionAdjustable, 21 mm
About the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X200S
The B06-SCD32X200S is an AirTAC double-acting, double-rod cylinder configured for battery manufacturing lines. The B06- prefix designates this as a battery-industry dedicated variant of the SCD32X200S, meaning it is mechanically identical to the standard model. Because the Ø12 mm piston rod passes through both end caps, the effective pressure area is identical in both directions, yielding an equal push and pull force of 483 N at 0.7 MPa.
This symmetric design is highly beneficial for cell stacking and tabbing operations where tooling is mounted on both ends. The 200 mm stroke operates at speeds of 30-800 mm/s, and the barrel features a built-in magnet (indicated by the S suffix) for CMSG/DMSG/EMSG sensor tracking. Adjustable cushions at 21 mm on each end decelerate the piston smoothly near stroke limits.
Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X200S Technical Specifications
| Model | Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X200S |
|---|---|
| Series | SCD double-rod tie-rod cylinder |
| Bore size | Ø32 mm |
| Rod diameter | Ø12 mm (both ends) |
| Stroke | 200 mm |
| Rod configuration | Double rod — rod through both caps |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SCD (double-rod) datasheet. Because the rod runs through both caps, the effective area is (bore² − rod²) in both directions. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm, double rod)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 70 kgf | |
Push and pull are EQUAL on a double-rod cylinder — both chambers lose the rod area, so effective area = (bore² − rod²) each way. Actual usable force is lower than theoretical due to friction and back-pressure; size with a safety margin.
Model Code: Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X200S
| SCD | Double-rod tie-rod cylinder series (rod out both ends). |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related types: SC (single rod), SCJ (adjustable stroke), SCT (multi-position). SCD mounting: Basic, FA, LB, TC, TCM1. Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X200S Is Used
Battery Cell Stacking
Provides equal push and pull force for precise, non-rotating pressing and alignment of battery cells during module assembly.
Dual-Tool Transfer
The through-rod allows tooling attachment on both ends, enabling a compact shuttle mechanism to pick and place tabs simultaneously.
Stroke End Sensing
The built-in magnet enables CMSG or DMSG sensors to detect exact positions for quality control during automated pack assembly.
Is the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X200S the Right Cylinder?
Choose this 32 mm bore when you need 345 N of thrust each way at 0.5 MPa for compact, two-sided actuation. If your battery handling system requires less force, stepping down is not an option in the SCD range, but if you need substantially more power, a 40 mm bore provides 528 N. If the application only drives a load from one side and does not require anti-rotation or a rear rod, a standard single-rod AirTAC SC cylinder is a lighter, more economical choice.
For stroke lengths of 200 mm, side loading on the unsupported rod remains moderate, but always use external guides if absorbing lateral stress during module transfer. To replace this unit exactly, match the 32 mm bore, 200 mm stroke, PT1/8 port thread, basic mounting style, and the built-in magnet. Remember that air pressure alone does not hold the load if the valve is centered; a mechanical lock is required for fail-safe positioning.
Double-rod checklist
- ✓ Need equal force / speed both directions?
- ✓ Rear rod for tooling, stopper or sensor flag?
- ✓ Better rod guidance / anti-rotation?
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Keep BOTH rod ends clear of side load and interference.
- check Adjust end cushion screws for smooth stops.
- check Use SCD mounting accessory (FA / LB / TC / TCM1).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X200S FAQ
The B06- prefix indicates this is an AirTAC cylinder dedicated to battery manufacturing applications. It is mechanically identical to the standard SCD32X200S, offering the same 32 mm bore, 200 mm stroke, and double-rod configuration.
A double-rod cylinder provides equal push and pull force (483 N at 0.7 MPa) because the rod area is subtracted from both chambers. The through-rod also offers better anti-rotation characteristics and allows mounting tooling on both ends for synchronized two-sided operations.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SCD Double-Rod Cylinders
Request a Quote for Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X200S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.