Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X225S
The AirTAC Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X225S is a genuine double-acting DOUBLE-ROD air cylinder: the Ø12mm piston rod extends from BOTH end caps, giving equal effective area — and therefore equal force — in push and pull. Ø32mm bore, 225mm stroke, PT1/8 ports and adjustable end cushioning.
- BoreØ32 mm
- Rod (both ends)Ø12 mm
- Stroke225 mm
- Port sizePT1/8
- Rod configDouble rod (through)
- CushionAdjustable, 21 mm
About the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X225S
The B06-SCD32X225S is an AirTAC double-acting, double-rod cylinder engineered for battery manufacturing lines. The B06- prefix designates this as a battery-industry dedicated variant of the base SCD32X225S, meaning it is mechanically identical to the standard model but flagged for cell and pack assembly applications. Because the piston rod passes through both end caps, the effective area is identical in both chambers, yielding an equal push and pull force of 483 N at 0.7 MPa.
Featuring a 32 mm bore and a 225 mm stroke, this unit includes a built-in magnet (the S suffix) for direct mounting of CMSG, DMSG, or EMSG sensors along the barrel. It uses a 12 mm diameter rod on both ends, PT1/8 ports, and adjustable cushions with a 21 mm length. The double-rod design provides enhanced anti-rotation characteristics and allows tooling to be mounted on the rear rod, while the overall retracted length is longer than a comparable single-rod SC cylinder due to the body length A(SCD) of 187 mm.
Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X225S Technical Specifications
| Model | Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X225S |
|---|---|
| Series | SCD double-rod tie-rod cylinder |
| Bore size | Ø32 mm |
| Rod diameter | Ø12 mm (both ends) |
| Stroke | 225 mm |
| Rod configuration | Double rod — rod through both caps |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SCD (double-rod) datasheet. Because the rod runs through both caps, the effective area is (bore² − rod²) in both directions. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm, double rod)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 70 kgf | |
Push and pull are EQUAL on a double-rod cylinder — both chambers lose the rod area, so effective area = (bore² − rod²) each way. Actual usable force is lower than theoretical due to friction and back-pressure; size with a safety margin.
Model Code: Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X225S
| SCD | Double-rod tie-rod cylinder series (rod out both ends). |
|---|---|
| 32 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related types: SC (single rod), SCJ (adjustable stroke), SCT (multi-position). SCD mounting: Basic, FA, LB, TC, TCM1. Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X225S Is Used
Cell Stacking Transfer
Moves battery cells between stacking stations using dual-side tooling, leveraging the equal push and pull force to maintain consistent positioning without rotation.
Module Shuttle Conveyor
Actuates a shuttle mechanism on a battery module assembly line, using the rear rod to mount a mechanical stopper while the front rod drives the payload.
Tab Welding Press
Provides a stable, non-rotating clamping action for battery tab welding, utilizing the built-in magnet to confirm stroke endpoints for process safety.
Is the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X225S the Right Cylinder?
Choose this 32 mm bore when your battery handling system requires 483 N of thrust in both directions within a compact footprint. If your assembly station needs less force, stepping down is not an option as 32 mm is the smallest SCD size, but stepping up to a 40 mm bore provides 739 N if your payload increases. If you do not need rear-rod tooling or symmetric thrust, a standard single-rod AirTAC SC cylinder will save space and cost. For applications involving heavy side loads, a dedicated guided cylinder is recommended over relying solely on the through-rod for support.
When replacing this unit, ensure a 5-point match: 32 mm bore, 225 mm stroke, PT1/8 port thread, basic mounting (or an SCD-compatible accessory like F-SC32LB), and the built-in magnet. Since the stroke is 225 mm, the unsupported rod length requires attention; use external guides to prevent rod bending and premature bearing wear under offset loads.
Double-rod checklist
- ✓ Need equal force / speed both directions?
- ✓ Rear rod for tooling, stopper or sensor flag?
- ✓ Better rod guidance / anti-rotation?
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Keep BOTH rod ends clear of side load and interference.
- check Adjust end cushion screws for smooth stops.
- check Use SCD mounting accessory (FA / LB / TC / TCM1).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X225S FAQ
The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated cylinder. It is mechanically and dimensionally identical to the standard SCD32X225S, simply designated for battery industry production lines.
The double-rod design provides equal push and pull force of 483 N at 0.7 MPa, better anti-rotation resistance, and allows mounting tooling on the rear rod. It does not hold position without air pressure, so a mechanical lock is needed if the load must be held during pressure loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SCD Double-Rod Cylinders
Request a Quote for Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD32X225S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.