The AirTAC Airtac SC32 Standard Cylinder SC32X225 is a genuine double-acting standard air cylinder with a Ø32mm bore and 225mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X225 is a compact double-acting tie-rod cylinder delivering 402 N of push force at 0.5 MPa, ideal for light-duty pneumatic tasks. With a 12 mm diameter rod and M10x1.25 thread, this 225 mm stroke unit provides a total extended body length of approximately 365 mm.
Built with a 21 mm adjustable air cushion, it decelerates the piston smoothly at stroke ends to reduce impact. This genuine AirTAC cylinder uses PT ports and standard TPU seals for reliable operation from -20 to +70 °C.
| Model | Airtac SC32 Standard Cylinder SC32X225 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 225 mm stroke and 402 N force are well-suited for pushing or lifting small components on compact assembly conveyors.
Provides consistent, controlled force for holding workpieces during light machining or bonding operations.
Ideal for test fixtures and fluid handling systems where a compact, clean pneumatic actuator is needed.
For applications needing slightly more force, consider stepping up to the 40 mm bore which provides 628 N at 0.5 MPa. When replacing an existing cylinder, ensure a 5-point match: 32 mm bore, 225 mm stroke, PT port thread, basic mounting, and no magnet. The 12 mm rod is robust for axial loads, but any side force at this stroke length should be managed with an external guide.
Quick checklist
At the standard operating pressure of 0.7 MPa, the push force is 563 N. The theoretical maximum force at 1.0 MPa is 804 N (82 kgf).
No. The AirTAC SC series is a tie-rod design that is shorter than a comparable ISO 15552 cylinder. It is only a direct replacement for another AirTAC SC32 tie-rod cylinder with matching bore, stroke, and port thread.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.