Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC30010C1WK
The AirTAC B52-GFC Copper-Free Air Source Treatment Component B52-GFC30010C1WK is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT3/8" ports, a 5 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT3/8"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC30010C1WK
The AirTAC GFC series is a two-unit air treatment set: a filter regulator plus a separate lubricator, covering filtration, regulation and oil-mist lubrication in one package. This GFC300-10C1WK is the 300 size with PT3/8 ports, a differential-pressure drain, fine 5 um filtration (W), the round external MPa gauge, and the K option fitting a reverse/check valve in the regulator section.
This is a genuine AirTAC part for compressed air only. The GFC family runs from 200 to 600 sizes with choices of drain type, filtration grade, gauge and thread (PT standard; G and NPT orderable). Flow is published as curves rather than a single rating, so we confirm datasheet figures and sizing on request.
Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC30010C1WK Technical Specifications
| Model | Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC30010C1WK |
|---|---|
| Series | GFC300 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT3/8" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC30010C1WK
| GFC300 | G-series two-unit set, 300 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-10 filter regulator and GL300-10 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC300 · PT3/8" · 5 µm |
|---|---|
| One size down | GFC200 |
| One size up | GFC400 |
| Three-unit equivalent | GC300-10 |
| Build order | Filter regulator first, lubricator last |
Where the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC30010C1WK Is Used
Pilot valve supply manifolds
A two-unit set feeding pilot-air manifolds on process valve actuation skids, with 5 um filtration for sensitive pilot valves and the check valve guarding against backflow.
Pick-and-place modules
Conditioning air to pick-and-place actuator modules on an electronics assembly machine, keeping the regulated circuit clean, lubricated and protected from reverse flow.
Air bearing and nozzle stations
Supplying fine-filtered, regulated and lubricated air to nozzle and air-blow stations on a production line where upstream supply dips must not backfeed the circuit.
Is the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC30010C1WK the Right Set?
This variant combines two options: the W suffix for 5 um filtration instead of the 40 um standard, and the K suffix for a fitted reverse/check valve in the regulator. Size (200/300/400/600) determines port and flow capacity - the 300 with 3/8 ports suits mid-range circuits. Drain is differential-pressure here (automatic A or manual M are orderable) and C1 specifies the round external gauge with MPa scale. Thread is PT standard, with G (BSPP) and NPT as catalogue options.
Since flow is published only as curves and not a single rating, ask us to confirm this unit's sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT3/8" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-10 filter regulator on its own.
Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC30010C1WK FAQ
AirTAC publishes flow for this series as curves rather than a single rated figure, so there is no one number to quote. Share your working pressure and air demand with us and we will confirm the datasheet figures and check this 3/8-port size against your application before you order.
W selects the fine 5 um filtration element in place of the standard 40 um, and K fits a reverse/check valve in the regulator section so flow passes one way only. The base set remains a two-unit GFC: filter regulator plus lubricator, 300 size, PT3/8, differential-pressure drain and round MPa gauge.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC30010C1WK
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.