Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC30010MC2W
The AirTAC B52-GFC Copper-Free Air Source Treatment Component B52-GFC30010MC2W is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT3/8" ports, a 5 µm element, a manual drain and regulation over 0.05 - 0.9 MPa (7 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT3/8"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade5 µm
- DrainManual drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC30010MC2W
GFC30010MC2W is a genuine AirTAC G-series two-unit set: a 300-size filter regulator joined to a lubricator, supplying filtered, regulated and lubricated compressed air through one 3/8 in PT ported line. The M code sets a manual drain on the filter bowl, C2 selects the external round pressure gauge with a psi scale, and W fits the 5 um filter element in place of the standard 40 um. With manual drainage, the regulator section adjusts from 0.05 to 0.9 MPa (7-130 psi).
Maximum working pressure is 1.0 MPa (145 psi) and the temperature range is -5 to 70 C (non-freezing); at size 300 the bowls are polycarbonate (PC), with aluminium alloy reserved for size 600. The GFC family spans sizes 200 to 600 and is offered with automatic or differential-pressure drains, the standard 40 um element, embedded square or external round gauges on MPa, psi or bar scales, and G (BSPP) or NPT threads as catalogue options. Flow is published as curves rather than a single rated figure, so we confirm sizing and datasheet figures on request.
Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC30010MC2W Technical Specifications
| Model | Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC30010MC2W |
|---|---|
| Series | GFC300 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT3/8" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC30010MC2W
| GFC300 | G-series two-unit set, 300 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-10 filter regulator and GL300-10 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC300 · PT3/8" · 5 µm |
|---|---|
| One size down | GFC200 |
| One size up | GFC400 |
| Three-unit equivalent | GC300-10 |
| Build order | Filter regulator first, lubricator last |
Where the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC30010MC2W Is Used
Trailer and dock equipment air
Conditions the air feeding pneumatic landing-leg, gate and trailer-dock actuators at a loading bay, with the psi gauge letting maintenance staff check settings in familiar US units.
Robot gripper air preparation
Prepares the supply to gripper cylinders on a robotic handling cell, stripping water and 5 um particles, holding the gripping pressure and metering oil mist for smooth cylinder travel.
Woodshop pneumatic nailer and clamp line
Feeds nailers, staplers and hold-down clamps at a woodworking cell, where the lubricator keeps tool motors running smoothly and the regulator holds a steady pressure read in psi.
Is the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC30010MC2W the Right Set?
Size 300 with a 3/8 in port is the mid step of the range (200 to 600, 1/8 in to 1 in); match it to your piping and air demand and we will verify it against the published flow curves before you order. The manual drain in this code opens the widest regulation window, 0.05 to 0.9 MPa (7-130 psi), useful for low set points, but it needs a routine bleed - pick the automatic drain code if the set will be left unattended. The 5 um element suits finer point-of-use air than the standard 40 um, and the C2 round gauge reads in psi for shops working in US units; the C1 code is identical but reads in MPa. Thread is PT as standard, with G (BSPP) and NPT as orderable options. Ask us to confirm sizing against the flow curves for your application.
Quick checklist
- ✓ Body size for your peak flow (PT3/8" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-10 filter regulator on its own.
Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC30010MC2W FAQ
AirTAC publishes G-series performance as flow curves, not as a single rated figure, so we do not state a number here. Send us your line pressure and air demand and we will confirm the sizing and the complete datasheet figures on request before you order.
The 2 in the C2 code selects the external round gauge with a psi scale, which suits shops and crews that work in US units. The otherwise identical C1 code carries the MPa scale, and bar scales are also available in the series - tell us which scale your team reads and we will match the code.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC30010MC2W
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.