Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC30015ANWK
The AirTAC B52-GFC Copper-Free Air Source Treatment Component B52-GFC30015ANWK is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/2" ports, a 5 µm element, a automatic drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1/2"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- DrainAutomatic drain
- Bowl materialPC
- Pressure gaugeNot fitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC30015ANWK
GFC30015ANWK is a genuine AirTAC G-series two-unit set combining a filter-regulator and a lubricator in two pieces that mount together, so the compressed air is filtered, regulated and lubricated in one pass. The W suffix fits the finer 5 um filter element, and the K suffix adds a reverse (check) valve to the regulator section. This size 300 configuration has PT1/2 ports as standard, an automatic drain on the filter bowl and no gauge fitted; bowls are polycarbonate at this size, with a maximum working pressure of 1.0 MPa (145 psi) and an operating range of -5 to 70 C (non-freezing).
It sits in the AirTAC G series across sizes 200 to 600, and this automatic-drain version adjusts from 0.15 to 0.9 MPa (20-130 psi). Flow is published as performance curves rather than a single rating, so ask us and we will confirm the datasheet figures for your application.
Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC30015ANWK Technical Specifications
| Model | Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC30015ANWK |
|---|---|
| Series | GFC300 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/2" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Not fitted |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC30015ANWK
| GFC300 | G-series two-unit set, 300 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| N | No pressure gauge (N). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-15 filter regulator and GL300-15 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC300 · PT1/2" · 5 µm |
|---|---|
| One size down | GFC200 |
| One size up | GFC400 |
| Three-unit equivalent | GC300-15 |
| Build order | Filter regulator first, lubricator last |
Where the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC30015ANWK Is Used
High-cycle assembly press cylinders
Conditions and lubricates the air driving rapid-stroke assembly press cylinders, where the 5 um element protects the valve train and the check valve supports the regulated condition between strokes.
Robotic welding cell clamp and torch-clean supply
Prepares air for the clamp actuators and torch-cleaning stations of a robotic welding cell, combining fine filtration, pressure control and oil mist in one mounted set.
Spray-booth actuator and agitator air on a coating line
Feeds lubricated, finely filtered air to booth door actuators and paint agitator drives on a coating line, with the automatic drain handling humid compressor output.
Is the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC30015ANWK the Right Set?
This is the most fully specified size 300 variant on the page: 5 um filtration (W) plus a factory-fitted reverse (check) valve (K) on top of the automatic-drain, gauge-less base set. Choose it when the downstream equipment needs the finer grade and you want the check valve in the same order. An embedded square gauge or external round gauge on an MPa, psi or bar scale can be added if you want the set-point visible; thread is PT as standard with G (BSPP) and NPT as catalogue options. If your flow demand sits near the top of size 300, compare sizes 400 and 600 - and because flow is published as curves rather than a single rating, send us your figures and we will confirm the sizing against the datasheet before you order.
Quick checklist
- ✓ Body size for your peak flow (PT1/2" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-15 filter regulator on its own.
Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC30015ANWK FAQ
We do not quote a flow number here because AirTAC publishes G-series flow as performance curves rather than a single rated figure. If your application is flow-critical, send us your demand and pressure and we will confirm the relevant curve and correct sizing from the datasheet before you order.
Yes. The N in GFC30015ANWK means no gauge is fitted. Units with a regulator can be ordered with an embedded square gauge, or with an external round gauge on an MPa, psi or bar scale - just ask and we will quote the correctly suffixed code. Everything else about this set, including the 5 um element and check valve, stays the same.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC30015ANWK
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.