Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC60025C1WK
The AirTAC B52-GFC Copper-Free Air Source Treatment Component B52-GFC60025C1WK is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1" ports, a 5 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- DrainDifferential-pressure drain
- Bowl materialAluminium alloy
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC60025C1WK
The AirTAC GFC60025C1WK is a genuine two-unit air-treatment set for compressed air only: a filter regulator plus a separate lubricator, with a reverse (check) valve fitted as denoted by the K in the code. The W code specifies the finer 5 um filter element in place of the 40 um standard. This size 600 configuration is built around 1 in. PT ports, a differential-pressure drain on the filter bowl, and an external round pressure gauge scaled in MPa. At 600 size the filter bowl is aluminium alloy.
Maximum working (inlet) pressure is 1.0 MPa (145 psi). With the differential-pressure drain fitted, the regulator adjusts from 0.15 to 0.9 MPa (20 to 130 psi), and the operating temperature range is -5 to 70 C (non-freezing). AirTAC offers this series in 200, 300, 400 and 600 sizes, with G (BSPP) or NPT thread options, automatic or manual drains, both filter grades, check-valve and gauge choices. Flow is published as curves rather than a single rating, so ask us to confirm figures from the datasheet for your application.
Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC60025C1WK Technical Specifications
| Model | Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC60025C1WK |
|---|---|
| Series | GFC600 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC60025C1WK
| GFC600 | G-series two-unit set, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR600-25 filter regulator and GL600-25 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC600 · PT1" · 5 µm |
|---|---|
| One size down | GFC400 |
| Three-unit equivalent | GC600-25 |
| Build order | Filter regulator first, lubricator last |
Where the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC60025C1WK Is Used
Pneumatic press station supply
A workholding press fed from a 1 in. branch: the set filters with a 5 um element, regulates and lubricates, while the fitted check valve sits in the circuit as specified for the station design.
Bottling line actuator feed
A packaging line's valve manifold and cylinder bank drawing from one treatment point: finely filtered, pressure-controlled air plus lubrication for the filler and capper pneumatics.
Laboratory utility air header
A lab building's utility-air header feeding general pneumatics: the 5 um element gives finer particulate removal ahead of the regulator, with lubrication metered into the distribution line.
Is the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC60025C1WK the Right Set?
Size 600 is the largest step in the G series, with 1 in. PT ports; step down to 400, 300 or 200 sizes with smaller ports if your demand is lower. The 40 um element is the series standard and this W version carries the optional 5 um grade for finer particulate removal. Drain types are differential-pressure (this unit), automatic (A) or manual (M); the drain choice also sets the regulation window. The K code means a reverse (check) valve is fitted; the non-K equivalent GFC60025C1W is supplied without one. Thread is PT as the standard, with G (BSPP) and NPT as catalogue options, and the C1 code means an external round gauge scaled in MPa. Flow is published as curves, not a single rated figure, so ask us to confirm sizing before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The aluminium-alloy bowls on the GFC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR600-25 filter regulator on its own.
Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC60025C1WK FAQ
AirTAC publishes flow for the G series as curves rather than a single rated number, so we do not quote a fixed figure here. Tell us your line pressure and air demand and we will confirm the relevant flow figures from the datasheet on request.
W specifies the optional 5 um filter element instead of the 40 um standard, and K means a reverse (check) valve is fitted; the equivalent without either option is GFC60025C1. The rest of the code is identical: two-unit FRL set, size 600, 1 in. PT ports, differential-pressure drain and a round MPa gauge.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC60025C1WK
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.