Airtac B52-GR Copper-Free Air Source Treatment Unit B52-GR20008LC4
The AirTAC Airtac B52-GR Copper-Free Air Source Treatment Unit B52-GR20008LC4 is a genuine G-series air pressure regulator. It holds a stable downstream pressure over the range 0.05 - 0.4 MPa (7 - 58 psi) with PT1/4" ports, and ships with a pressure gauge. A regulator does not filter the air — put a GF filter upstream, or use a GFR filter regulator, when water and particulate must also be removed.
- TypePressure regulator
- Port sizePT1/4"
- Regulating range0.05 - 0.4 MPa (7 - 58 psi)
- Pressure typeLow-pressure type
- Pressure gaugeFitted
- Reflux valveNot fitted
- ThreadPT
- BracketFixing bracket included
About the Airtac B52-GR Copper-Free Air Source Treatment Unit B52-GR20008LC4
The AirTAC GR20008LC4 is a compressed-air pressure regulator from the G series, sized 200 with 1/4 in. PT ports. It is the low-pressure (L) type, so its output is adjustable up to 0.4 MPa for circuits that must not run at full line pressure. It carries a round external pressure gauge, includes a mounting bracket, and is rated to 1.0 MPa (145 psi) maximum inlet pressure with an operating temperature of -20 to 70 C.
This is a genuine AirTAC part. The GR series is offered in sizes 200, 300, 400 and 600 with port sizes from 1/8 to 1 in., a choice of gauge (round or square; MPa, psi or bar scale), a low-pressure option, and PT, G or NPT threads. We will confirm the gauge scale for this specific code along with all datasheet figures on request.
Airtac B52-GR Copper-Free Air Source Treatment Unit B52-GR20008LC4 Technical Specifications
| Model | Airtac B52-GR Copper-Free Air Source Treatment Unit B52-GR20008LC4 |
|---|---|
| Series | GR200 pressure regulator |
| Port size | PT1/4" (PT thread) |
| Regulating range | 0.05 - 0.4 MPa (7 - 58 psi) |
| Pressure type | Low-pressure type |
| Bracket | Fixing bracket included |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -20 to +70 °C |
| Pressure gauge | Fitted — round, Factory standard scale |
| Reflux valve | Not fitted |
| Mounting | Panel mounting; optional fixing bracket |
Specifications follow the official AirTAC G-series air-preparation data. Note the GR temperature range is -20 to +70 °C, wider than the other G-series units. A regulator has no bowl and no filter element, so there is no filtering grade. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac B52-GR Copper-Free Air Source Treatment Unit B52-GR20008LC4
| GR200 | G-series pressure regulator, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| L | Low-pressure type — 0.05 - 0.4 MPa (7 - 58 psi). Blank is standard, L is the low-pressure type. |
| (blank) | Fixing bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, type, bracket, gauge, gauge shape, scale, thread, reflux — a blank position takes the default. Example: GR300-08LNK is a 300 body, PT1/4", low-pressure type, no gauge, with reflux valve.
Size Class
- GR200PT1/8" - PT1/4"
- GR300PT1/4" - PT1/2"
- GR400PT3/8" - PT1/2"
- GR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure.
| This model | GR200 · PT1/4" · 0.05 - 0.4 MPa (7 - 58 psi) |
|---|---|
| One size up | GR300 |
| Line order | Filter first, then regulator, then lubricator |
Where the Airtac B52-GR Copper-Free Air Source Treatment Unit B52-GR20008LC4 Is Used
Maintenance-shop air drop
Provide a low-pressure regulated drop at a maintenance bench for powering hand-held pneumatic tools and test rigs set below shop line pressure.
Glue and sealant dispensing rig
Regulate the air feed to a bead-dispensing head on a production rig, where low stable pressure is part of the dispensing setup.
Prototype test-rig air supply
Feed adjustable low-pressure air to instrumentation and actuator loads on an engineering test rig, with a round gauge at the panel for the operator.
Is the Airtac B52-GR Copper-Free Air Source Treatment Unit B52-GR20008LC4 the Right Regulator?
This code fixes the key choices: size 200 with 1/4 in. PT ports, low-pressure (L) type with adjustment up to 0.4 MPa, and a round external gauge. The gauge scale digit on this code is not one of the standard MPa/psi/bar scales, so we will confirm exactly what is fitted before you order; the standard round options are MPa, psi or bar. PT thread is the standard; G (BSPP) and NPT are catalogue options, and a no-bracket (J) version exists.
For sizing, work from the port step: 200/1/4 in. suits light branch lines, while larger sizes carry more flow. Flow for this series is published as curves, not a single rated figure, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Standard 0.9 MPa or low-pressure 0.4 MPa
- ✓ Gauge fitted, or order N without
- ✓ Gauge shape C round / F square
- ✓ Scale MPa (1), psi (2) or bar (3)
- ✓ Reflux valve needed, order K
Installation & Maintenance Notes
- check Install downstream of the filter, following the airflow arrow.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure while air is flowing, then lock the knob.
- check Adjust within 0.05 - 0.4 MPa (7 - 58 psi) only.
- check Operating range -20 to +70 °C.
- check Panel-mount or use the fixing bracket; do not hang it on tubing.
Without a reflux valve, air cannot flow back through the regulator — order the K option if reverse flow is required. A regulator does not remove water or particulate; that is the filter's job.
Airtac B52-GR Copper-Free Air Source Treatment Unit B52-GR20008LC4 FAQ
AirTAC publishes GR series flow as curves rather than a single rated number, so there is no one figure we can quote. Tell us your inlet pressure and required downstream flow and we will confirm the sizing from the datasheet curves on request.
The standard GR gauge-scale codes are 1 = MPa, 2 = psi and 3 = bar, and this code carries a different digit, so we will not guess. Send us the code and we will confirm the exact fitted gauge scale from the datasheet on request before you order.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac B52-GR Copper-Free Air Source Treatment Unit B52-GR20008LC4
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.