Airtac B52-GR Copper-Free Air Source Treatment Unit B52-GR30008JC1
The AirTAC B52-GR Copper-Free Air Source Treatment Unit B52-GR30008JC1 is a genuine G-series air pressure regulator. It holds a stable downstream pressure over the range 0.05 - 0.9 MPa (7 - 130 psi) with PT1/4" ports, and ships with a pressure gauge. A regulator does not filter the air — put a GF filter upstream, or use a GFR filter regulator, when water and particulate must also be removed.
- TypePressure regulator
- Port sizePT1/4"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Pressure typeStandard type
- Pressure gaugeFitted
- Reflux valveNot fitted
- ThreadPT
- BracketSupplied without bracket
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B52-GR Copper-Free Air Source Treatment Unit B52-GR30008JC1
The AirTAC GR series is a pure air pressure regulator: it reduces and holds a stable downstream pressure from a compressed air line, with no filter, no drain bowl and no lubrication function. This GR30008JC1 is the 300 size with a 1/4 in PT port (PT is the standard thread; G and NPT are catalogue options), the standard pressure type with a 0.05-0.9 MPa (7-130 psi) adjustment range, and an external round gauge reading in MPa. The J code means no mounting bracket is supplied. Maximum inlet pressure is 1.0 MPa (145 psi), the working temperature range is -20 to 70 C (non-freezing), and the medium is compressed air only.
This is a genuine AirTAC part distributed for the US market. The G-series regulator family is offered in sizes 200, 300, 400 and 600 across a range of port sizes, with a low-pressure type option (up to 0.4 MPa), optional check valve, embedded square or external round gauges in MPa, psi or bar scale, G (BSPP) or NPT thread variants, and bracket or panel mounting. Flow capacity is published as curves rather than a single figure, so we confirm the datasheet and flow curve for your exact model on request.
Airtac B52-GR Copper-Free Air Source Treatment Unit B52-GR30008JC1 Technical Specifications
| Model | Airtac B52-GR Copper-Free Air Source Treatment Unit B52-GR30008JC1 |
|---|---|
| Series | GR300 pressure regulator |
| Port size | PT1/4" (PT thread) |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Bracket | Supplied without bracket |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -20 to +70 °C |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Not fitted |
| Mounting | Panel mounting; optional fixing bracket |
Specifications follow the official AirTAC G-series air-preparation data. Note the GR temperature range is -20 to +70 °C, wider than the other G-series units. A regulator has no bowl and no filter element, so there is no filtering grade. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac B52-GR Copper-Free Air Source Treatment Unit B52-GR30008JC1
| GR300 | G-series pressure regulator, 300 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Standard type — 0.05 - 0.9 MPa (7 - 130 psi). Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, type, bracket, gauge, gauge shape, scale, thread, reflux — a blank position takes the default. Example: GR300-08LNK is a 300 body, PT1/4", low-pressure type, no gauge, with reflux valve.
Size Class
- GR200PT1/8" - PT1/4"
- GR300PT1/4" - PT1/2"
- GR400PT3/8" - PT1/2"
- GR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure.
| This model | GR300 · PT1/4" · 0.05 - 0.9 MPa (7 - 130 psi) |
|---|---|
| One size down | GR200 |
| One size up | GR400 |
| Line order | Filter first, then regulator, then lubricator |
Where the Airtac B52-GR Copper-Free Air Source Treatment Unit B52-GR30008JC1 Is Used
Conveyor diverter and stopper cylinders
Regulates the branch feeding diverter, stopper and gate cylinders along a conveyor line, giving operators a local MPa reading at the point of use.
Spray gun supply in finishing shops
Sits at the drop feeding spray guns in a paint or coating booth, letting finishers set the supply pressure the gun manufacturer specifies without disturbing the main line.
Maintenance shop air drops
Installed on bench drops in a maintenance area to give technicians an adjustable, gauge-monitored supply for air tools and small test jobs.
Is the Airtac B52-GR Copper-Free Air Source Treatment Unit B52-GR30008JC1 the Right Regulator?
Match the 200/300/400/600 size to your port and flow demand - larger sizes carry larger ports and more flow. This configuration pairs the no-bracket J option with an external round gauge in MPa scale; psi and bar scales and a no-gauge version exist in the family. Choose PT (standard), G (BSPP) or NPT thread, and add the K check valve if the downstream side can push pressure back. Because flow is published as curves and not a single rating, send us your application parameters and we will confirm sizing against the datasheet before you order.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Standard 0.9 MPa or low-pressure 0.4 MPa
- ✓ Gauge fitted, or order N without
- ✓ Gauge shape C round / F square
- ✓ Scale MPa (1), psi (2) or bar (3)
- ✓ Reflux valve needed, order K
Installation & Maintenance Notes
- check Install downstream of the filter, following the airflow arrow.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure while air is flowing, then lock the knob.
- check Adjust within 0.05 - 0.9 MPa (7 - 130 psi) only.
- check Operating range -20 to +70 °C.
- check Panel-mount or use the fixing bracket; do not hang it on tubing.
Without a reflux valve, air cannot flow back through the regulator — order the K option if reverse flow is required. A regulator does not remove water or particulate; that is the filter's job.
Airtac B52-GR Copper-Free Air Source Treatment Unit B52-GR30008JC1 FAQ
There is no single rated flow figure to quote - AirTAC publishes regulator capacity as flow curves only. Tell us your inlet pressure and the flow your application needs, and we will confirm the sizing from the datasheet curve for this exact model on request.
J means the unit is supplied without a mounting bracket, C means an external round pressure gauge is fitted, and 1 means that gauge reads in MPa. Other family options include the embedded square gauge, psi and bar scales, and a bracket-included version.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac B52-GR Copper-Free Air Source Treatment Unit B52-GR30008JC1
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.