Airtac BSED Clamping Double Acting Cylinder BSED32X75S
The AirTAC BSED Clamping Double Acting Cylinder BSED32X75S combines a double-rod ISO 15552 cylinder — a Ø12mm rod out BOTH ends for equal force both directions — with an integrated spring-applied, air-released ROD LOCK that holds up to 600 N in either direction if air is lost. Ø32mm bore, 75mm stroke, PT1/8 ports, G1/8 lock-release.
- BoreØ32 mm
- Stroke75 mm
- Static holding force600 N
- ConfigurationDouble rod + lock
- Cylinder portPT1/8
- Lock-release portG1/8
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac BSED Clamping Double Acting Cylinder BSED32X75S
The AirTAC BSED32X75S is a double-acting, double-rod ISO 15552 profile cylinder featuring an integrated spring-applied, air-released rod lock. A rod exits both ends, delivering equal thrust and speed in both directions—about 345 N each way at 0.5 MPa. The rear rod is ideal for mounting a flag or cam and naturally resists rotation.
The fail-safe collet lock delivers a 600 N static holding force in both directions without requiring live air. Control it via the separate G1/8 release port, keeping operating pressure between 0.15 and 0.7 MPa. The -S magnet option supports CMSE reed and DMSE electronic sensors for position feedback.
Double Rod + 600 N Rod Lock (Ø32mm)
A rod exits both ends for symmetric force and back-rod tooling, and a spring clamps the collet so the Airtac BSED Clamping Double Acting Cylinder BSED32X75S holds its position in both directions on air loss or E-stop. Apply 0.15–0.7 MPa to the G1/8 release port to unlock. Engage only after the rod has stopped (not a dynamic brake), and release only when both piston sides are pressure-balanced; allow ≥0.5 s for full release.
Airtac BSED Clamping Double Acting Cylinder BSED32X75S Technical Specifications
| Model | Airtac BSED Clamping Double Acting Cylinder BSED32X75S |
|---|---|
| Series | BSED ISO 15552 double-rod rod-lock cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Static holding force | 600 N |
| Cylinder port | PT1/8 |
| Lock-release port | G1/8 |
| Configuration | Double rod, double acting |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Unlocking pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Max stroke | Up to 700 mm |
Specifications follow the official AirTAC BSED datasheet. Rod thread M10×1.25 both ends. Mounting (BSED): Basic, LB, FA, TC. Port options: PT (standard) / G (BSPP); lock-release port is G1/8.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa (max) | 484 N |
| Max drive (@0.7 MPa) | 49 kgf |
A rod exits both ends, so force is equal on extend and retract. Drive force is separate from the 600 N static lock holding force. Size with a safety margin.
Model Code: Airtac BSED Clamping Double Acting Cylinder BSED32X75S
| B | Rod-lock cylinder prefix. |
|---|---|
| SED | ISO 15552 double-rod double-acting body. |
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Thread: PT (blank) / G. Mounting (BSED): Basic, LB, FA, TC. Related: SED (double rod, no lock), BSE (single-rod rod lock). Sensors CMSE/DMSE fit magnetic BSED.
Where the Airtac BSED Clamping Double Acting Cylinder BSED32X75S Is Used
Vertical Lift Jigs
Holds a 60 kg vertical jig securely in place with 600 N of fail-safe force during an E-stop, while the 483 N both-way drive handles precise up/down indexing.
Shuttle Conveyors
Equal push and pull force stabilizes horizontal shuttle transfer, with the rear rod available for mounting stroke-limit cams.
Pick-and-Place Stops
Locks the rod instantly upon air loss to prevent a 32 mm pick-and-place axis from drifting, ensuring the workpiece stays positioned.
Is the Airtac BSED Clamping Double Acting Cylinder BSED32X75S the Right Cylinder?
Select this 32 mm bore when an application demands symmetric 483 N both-way force at 0.7 MPa alongside a 600 N fail-safe hold. If your load requires less holding, there is no smaller BSED bore. If you need more force, step up to the 40 mm bore, which provides 528 N at 0.5 MPa and a 900 N holding force. Always verify your static load is 600 N or under.
Engage the lock only after the rod completely stops, and release it only when both piston sides are pressure-balanced, allowing at least 0.5 s for the transition. When replacing a unit, match the 32 mm bore, 75 mm stroke, PT1/8 cylinder port, and your specific mounting choice (Basic, LB, FA, or TC).
Quick checklist
- ✓ Need both symmetric force AND fail-safe hold?
- ✓ Load to hold ≤ 600 N?
- ✓ Back-rod space for tooling/flag
- ✓ Lock engaged only when stopped
- ✓ G1/8 release-air line available
Installation & Safety Notes
- check Engage the lock only after the rod has stopped — not a dynamic brake.
- check Release only when both piston sides are pressure-balanced.
- check Allow ≥0.5 s for full release before commanding motion.
- check Feed the G1/8 release port with 0.15–0.7 MPa clean air.
- check Support both rod ends; avoid side load.
- check Use BSED mounting (Basic/LB/FA/TC).
Airtac BSED Clamping Double Acting Cylinder BSED32X75S FAQ
The spring-applied collet immediately clamps the rod, providing a 600 N bidirectional static hold without any live air. It is a fail-safe lock, not a dynamic brake, so it must only be engaged after the rod stops moving.
The BSED32X75S provides an equal drive force of 345 N at 0.5 MPa and 483 N at 0.7 MPa (max 49 kgf) in both directions. The static holding force is 600 N. It operates at speeds of 30-800 mm/s, with a 27 mm cushion length at both ends.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC BSED Cylinders
Request a Quote for Airtac BSED Clamping Double Acting Cylinder BSED32X75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.