
The AirTAC GAFC Air Service Unit GAFC200C08ALN is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
This AirTAC GAFC200C08ALN is a compact F.R.L. combination built from two units on a single T-bracket: a filter-regulator body followed by a lubricator. The metal bowl (C) holds 25 cc of condensate, while the lubricator's oil bowl holds 36 cc. It operates in the lower pressure band of 0.15-0.4 MPa (20-58 psi) and filters to 40 um.
The automatic drain clears condensate without an operator, making it a fit-and-forget choice for a 1/4in line. With no gauge supplied, the 1/8in gauge connection is available if you need to read the set pressure. At 590 g, it is light enough for a small jig or a single actuator, but it still needs a proper panel mount rather than support from the tubing.
| Model | Airtac GAFC Air Service Unit GAFC200C08ALN |
|---|---|
| Series | GAFC200 F.R.L. combination |
| Port size | 1/4" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 590 g |
Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFC200 is 1/8" if you add one.
| GAFC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAFR200-08 filter & regulator, GAL200-08 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAFC300 (curve to 3500 L/min) |
| Build order | Filter & regulator → bracket → lubricator |
Feed a small pneumatic jig or a single clamping cylinder on an assembly bench. The 1/4in port and 590 g weight suit a compact setup, and the automatic drain keeps the condensate bowl from overflowing during long production runs.
Supply a laboratory test rig that needs regulated air at a modest pressure. The lower-pressure range of 0.15-0.4 MPa (20-58 psi) is well matched to delicate instruments, and the 40 um element protects them from coarse particles.
Power a small air tool or a blow-off nozzle on a maintenance cart. The metal bowl resists knocks in a workshop environment, and the automatic drain means you do not have to check the bowl every shift.
Choose the GAFC200 body for 1/8in or 1/4in ports; this model uses 1/4in (code 08). The metal bowl is a build choice, but the common specification of 1.0 MPa max and -5 to 70 C applies to all bowl materials, so confirm it suits your surroundings. The automatic drain (A) is ideal for wet or unattended lines, while the lower-pressure type (L) tops out at 0.4 MPa - if your machine may ever need more, pick a standard type instead. The 40 um element is the default; the W option gives 5 um for finer filtration. No gauge is fitted, so the 1/8in connection is there if you add one later. The thread is PT with an MPa/psi scale if a gauge is installed. Spares are the GAFR200-08 filter-regulator and GAL200-08 lubricator, both orderable separately. The 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range, so plan your inlet pressure accordingly.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR200-08 filter-regulator on that branch instead of the full combination.
The GAFC200C08ALN operates at 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It works in temperatures from -5 to 70 C and uses ISO VG 32 oil. The drain bowl holds 25 cc, the oil bowl holds 36 cc, and the unit weighs 590 g. The port is 1/4in and the filter grade is 40 um.
The N after the port code means no gauge is supplied. The GAFC200 body has a 1/8in gauge connection, so you can fit a separate gauge if you need to read the set pressure. Without one, the outlet pressure cannot be monitored directly on the unit.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.