verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAFC200 · F.R.L. Combination (Filter-Regulator + Lubricator)

Airtac GAFC Air Service Unit GAFC200C08ALNW

The AirTAC GAFC Air Service Unit GAFC200C08ALNW is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).

  • TypeF.R.L. combination
  • Port size1/4"
  • Pressure range0.15 - 0.4 MPa (20 - 58 psi)
  • Filtering grade5 µm
  • Bowl materialMetal
  • Drainautomatic
  • Pressure gaugeNot fitted
  • Weight590 g
$65.67 $73.79Save 11% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every GAFC200-08 bowl, type and element option on one page All GAFC200-08 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac GAFC Air Service Unit GAFC200C08ALNW

This AirTAC GAFC200C08ALNW is a compact F.R.L. combination built from two units on a shared T-bracket: a filter-regulator body that cleans and sets the air pressure, followed by a lubricator that adds a metered oil mist. The 1/4in port size and 590 g mass place it in the smallest GAFC size class, suited for single actuators or small jigs where space is tight. It carries a 5 um element for finer filtration and a metal bowl, with the lower-pressure regulator set for 0.15-0.4 MPa (20-58 psi).

The automatic drain clears condensate from the 25 cc bowl without operator attention, while the separate 36 cc oil bowl holds enough lubricant for extended runs. No gauge is supplied with this model, so the 1/8in gauge connection is available if you need to add one later. The 5 um element traps finer particles than the standard 40 um grade, which protects precision valves but requires more frequent element service. Rated for -5 to 70 C, it must not freeze, and AirTAC recommends ISO VG 32 oil for the lubricator.

Airtac GAFC Air Service Unit GAFC200C08ALNW Technical Specifications

ModelAirtac GAFC Air Service Unit GAFC200C08ALNW
SeriesGAFC200 F.R.L. combination
Port size1/4" (PT thread)
Filtering grade5 µm
Pressure range0.15 - 0.4 MPa (20 - 58 psi)
TypeLower pressure
Bowl materialMetal
Drain typeAutomatic drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl25 cc
Capacity of oil bowl36 cc
Recommended lubricantISO VG 32 or equivalent
Weight590 g

Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFC200 is 1/8" if you add one.

Model Code: Airtac GAFC Air Service Unit GAFC200C08ALNW

GAFC200GA200 series F.R.L. unit — sets ports, bowl capacity and weight.
CBowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N).
08Port size 1/4". This body offers 06 = 1/8", 08 = 1/4".
ADrain: Automatic drain.
LLower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L).
NNo pressure gauge; 1/8" gauge connection.
WFiltering grade 5 µm.
(blank)PT thread; gauge scale MPa / psi.
(blank)No reverse-flow valve.

Constituent units, orderable separately as spares: GAFR200-08 filter & regulator, GAL200-08 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.

Size Class & Flow Envelope

  • GAFC2001/8"-1/4" · 1750 L/min
  • GAFC3001/4"-1/2" · 3500 L/min
  • GAFC4003/8"-1/2" · 6000 L/min
  • GAFC5003/4" · 7000 L/min
  • GAFC6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAFC200 · 1/4" · curve to 1750 L/min
One size upGAFC300 (curve to 3500 L/min)
Build orderFilter & regulator → bracket → lubricator

Where the Airtac GAFC Air Service Unit GAFC200C08ALNW Is Used

precision_manufacturing

Precision valve protection

Feed a single small pneumatic cylinder or a precision solenoid valve on a benchtop assembly fixture, where the 5 um element keeps fine particles from affecting valve spool movement.

packaging

Compact packaging machine

Install on a small carton-erecting station that runs a single 1/4in actuator, using the automatic drain to handle condensate in a line that cycles frequently.

handyman

Low-pressure test rig

Use in a laboratory test bench that needs regulated air at 0.15-0.4 MPa, where the lower-pressure range gives finer adjustment for sensitive instruments.

Is the Airtac GAFC Air Service Unit GAFC200C08ALNW the Right Air-Prep Unit?

The GAFC200 body with a 1/4in port (code 08) is the entry point of the series, and the catalogue flow curve is plotted to 1750 L/min at 0.7 MPa inlet as a sizing envelope. The metal bowl (C) is a build choice for the surrounding environment, and the shared specification of 1.0 MPa max pressure and -5 to 70 C applies regardless of bowl material, so confirm compatibility for your specific conditions. The automatic drain (A) suits unattended lines, while the lower-pressure type (L) tops out at 0.4 MPa, so if your machine may ever need more than that, choose the standard S type instead. The 5 um element (W) is for finer filtration, and the PT thread comes with a gauge scale in MPa/psi, though this model ships without a gauge. The two units are orderable separately as the GAFR200-08 filter-regulator and the GAL200-08 lubricator. With a 1.0 MPa max supply, you have about 0.6 MPa of headroom above the 0.4 MPa top of this unit's regulated band.

Quick checklist

  • ✓ Body size for your peak flow (1/4" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Thread & gauge scale (PT / G / NPT)
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter-regulator first, lubricator last.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Fill the oil bowl with ISO VG 32 or equivalent only.
  • check Drain condensate before the 25 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 590 g unit on its bracket, not on the tubing.

The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR200-08 filter-regulator on that branch instead of the full combination.

Airtac GAFC Air Service Unit GAFC200C08ALNW FAQ

This F.R.L. combination operates at 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). It has a 25 cc drain bowl and a 36 cc oil bowl, weighs 590 g, and uses ISO VG 32 lubricant. The temperature range is -5 to 70 C, and it must not freeze.

The C code specifies a metal bowl, which is a build choice for the surrounding environment; the catalogue gives no impact or chemical data, so confirm it suits your conditions. The N after the port code means no gauge is supplied, but the 1/8in gauge connection is available if you want to add one later.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Request a Quote for Airtac GAFC Air Service Unit GAFC200C08ALNW

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for GAFC200C08ALNW and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.