Airtac GAFC Air Service Unit GAFC200C08ASK
The AirTAC GAFC Air Service Unit GAFC200C08ASK is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination
- Port size1/4"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- Bowl materialMetal
- Drainautomatic
- Pressure gaugeCircular, MPa / psi
- Weight590 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAFC Air Service Unit GAFC200C08ASK
This GAFC200C08ASK is an F.R.L. combination where the filter and regulator share one body, paired with a lubricator on a T-bracket. With a 1/4in port and 40 um element, it filters solids and moisture, sets pressure to 0.15-0.9 MPa (20-130 psi), then adds a controlled oil mist. The metal bowl holds 25 cc of condensate while the oil bowl holds 36 cc, and the whole unit weighs 590 g.
The automatic drain clears condensate without an operator, making it suitable for unattended lines. A circular gauge with MPa/psi scale is fitted, and the reverse-flow valve is included. The catalogue flow curve plots to 1750 L/min at 0.7 MPa inlet, serving as a sizing envelope rather than a rated capacity.
Airtac GAFC Air Service Unit GAFC200C08ASK Technical Specifications
| Model | Airtac GAFC Air Service Unit GAFC200C08ASK |
|---|---|
| Series | GAFC200 F.R.L. combination |
| Port size | 1/4" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 590 g |
Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code.
Model Code: Airtac GAFC Air Service Unit GAFC200C08ASK
| GAFC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAFR200-08 filter & regulator, GAL200-08 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.
Size Class & Flow Envelope
- GAFC2001/8"-1/4" · 1750 L/min
- GAFC3001/4"-1/2" · 3500 L/min
- GAFC4003/8"-1/2" · 6000 L/min
- GAFC5003/4" · 7000 L/min
- GAFC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAFC300 (curve to 3500 L/min) |
| Build order | Filter & regulator → bracket → lubricator |
Where the Airtac GAFC Air Service Unit GAFC200C08ASK Is Used
Precision Fixture Clamping
Feed a single-axis pneumatic clamp on a CNC fixture with regulated, lubricated air at 1/4in port size.
Small Conveyor Stop
Operate a pneumatic stop cylinder on a light assembly conveyor, where the automatic drain reduces maintenance checks.
Bench Press Actuation
Supply a small bench-mounted arbor press with filtered and lubricated air for consistent cycle operation.
Is the Airtac GAFC Air Service Unit GAFC200C08ASK the Right Air-Prep Unit?
Choose this GAFC200 for small jigs or single actuators where 1/4in ports match existing tubing. The metal bowl is a build choice for the environment; confirm it suits your surroundings since the specification does not change with material. The automatic drain suits wet or remote lines, while the standard pressure type covers most shop air. The PT thread carries an MPa/psi gauge scale, and the 5 um element option is available if finer filtration is needed. Spare parts are GAFR200-08 and GAL200-08, both orderable separately. With 1.0 MPa max supply, you have about 0.1 MPa above the 0.9 MPa regulated top, so plan supply pressure accordingly if you need the full range.
Quick checklist
- ✓ Body size for your peak flow (1/4" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter-regulator first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 590 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR200-08 filter-regulator on that branch instead of the full combination.
Airtac GAFC Air Service Unit GAFC200C08ASK FAQ
The working pressure range is 0.15-0.9 MPa (20-130 psi), with a max pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). Temperature range is -5 to 70 C. The drain bowl holds 25 cc, oil bowl holds 36 cc, and the unit weighs 590 g. Recommended lubricant is ISO VG 32.
The K specifies a reverse-flow (reflux) valve fitted to the unit. The catalogue shows it as a separate pneumatic symbol. It is included in this model as an ordering difference from the standard version.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFC Air Service Unit GAFC200C08ASK
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.