
The AirTAC GAFC Air Service Unit GAFC200C08ASNW is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
This GAFC200C08ASNW is a two-piece F.R.L. combination: the filter and regulator share one body, and the lubricator is mounted beside them on a T-bracket with quick clamps. Air is cleaned and set to pressure first, then a metered oil mist is added downstream, so oil never travels back through the regulator seat. It carries a 1/4in port and weighs 590 g, placing it in the smallest GAFC size class, suited to a single actuator or a small jig.
The metal bowl holds 25 cc of condensate and the oil bowl 36 cc, with a 5 um element that traps finer particles than the standard 40 um grade. The automatic drain clears water without an operator, which suits wet lines or unattended machines. No gauge is supplied, so the set pressure cannot be read without adding one to the 1/8in gauge connection.
| Model | Airtac GAFC Air Service Unit GAFC200C08ASNW |
|---|---|
| Series | GAFC200 F.R.L. combination |
| Port size | 1/4" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 590 g |
Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFC200 is 1/8" if you add one.
| GAFC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAFR200-08 filter & regulator, GAL200-08 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAFC300 (curve to 3500 L/min) |
| Build order | Filter & regulator → bracket → lubricator |
Feed a single pneumatic clamp on a benchtop assembly fixture, where the 5 um element protects the clamp's fine seals from abrasive particles.
Supply a small laboratory test rig that runs a single air cylinder, with the automatic drain keeping condensate out of the instrument air line.
Power a portable maintenance cart's air tools, with the metal bowl standing up to workshop handling and the lubricator adding oil for tool wear.
Choose the GAFC200 body and 1/4in port for low-flow circuits, and step up to a GAFC300 (3500 L/min envelope at 0.7 MPa inlet) when a line needs more capacity. The metal bowl is a build choice, not a performance upgrade, since the 1.0 MPa maximum and -5 to 70 C range are identical across PC, metal and nylon. The automatic drain is fitted, and the 5 um element trades finer filtration for more frequent service. The PT thread carries a gauge scale in MPa and psi if you add a gauge later. Spare parts are orderable as the GAFR200-08 filter & regulator and the GAL200-08 lubricator. The 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range, so plan a supply near 1.0 MPa if you need the full regulated output.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR200-08 filter-regulator on that branch instead of the full combination.
This unit operates at 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It is rated for -5 to 70 C and should not freeze. The drain bowl holds 25 cc and the oil bowl 36 cc, with a total weight of 590 g. Use ISO VG 32 oil in the lubricator.
The N after the port code means no gauge is supplied with this unit. If you need to read the set pressure, you can add a gauge to the 1/8in connection on the GAFC200 body. The PT thread port accepts a gauge with an MPa and psi scale.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.