verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAFC200 · F.R.L. Combination (Filter-Regulator + Lubricator)

Airtac GAFC Air Service Unit GAFC200C08ASW

The AirTAC GAFC Air Service Unit GAFC200C08ASW is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).

  • TypeF.R.L. combination
  • Port size1/4"
  • Pressure range0.15 - 0.9 MPa (20 - 130 psi)
  • Filtering grade5 µm
  • Bowl materialMetal
  • Drainautomatic
  • Pressure gaugeCircular, MPa / psi
  • Weight590 g
$71.09 $79.58Save 10% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every GAFC200-08 bowl, type and element option on one page All GAFC200-08 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac GAFC Air Service Unit GAFC200C08ASW

This AirTAC GAFC200C08ASW is a two-piece F.R.L. combination: a filter-regulator in one body paired with a lubricator, mounted on a shared T-bracket with quick clamps. The 1/4in port and 590 g mass suit small jigs or a single actuator, and the metal bowl is specified by the C code. Air is filtered and regulated first, then the lubricator adds a metered oil mist last, so oil never passes back through the regulator seat.

The standard pressure range is 0.15-0.9 MPa (20-130 psi), with a 5 um element that traps finer particles than the standard 40 um grade. The automatic drain clears condensate without an operator, and the circular gauge reads in MPa/psi for the PT thread. Max pressure is 1.0 MPa (145 psi), proof pressure is 1.5 MPa (215 psi), and the unit is rated for -5 to 70 C with ISO VG 32 oil recommended.

Airtac GAFC Air Service Unit GAFC200C08ASW Technical Specifications

ModelAirtac GAFC Air Service Unit GAFC200C08ASW
SeriesGAFC200 F.R.L. combination
Port size1/4" (PT thread)
Filtering grade5 µm
Pressure range0.15 - 0.9 MPa (20 - 130 psi)
TypeStandard
Bowl materialMetal
Drain typeAutomatic drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl25 cc
Capacity of oil bowl36 cc
Recommended lubricantISO VG 32 or equivalent
Weight590 g

Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code.

Model Code: Airtac GAFC Air Service Unit GAFC200C08ASW

GAFC200GA200 series F.R.L. unit — sets ports, bowl capacity and weight.
CBowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N).
08Port size 1/4". This body offers 06 = 1/8", 08 = 1/4".
ADrain: Automatic drain.
SStandard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L).
(blank)Circular pressure gauge fitted.
WFiltering grade 5 µm.
(blank)PT thread; gauge scale MPa / psi.
(blank)No reverse-flow valve.

Constituent units, orderable separately as spares: GAFR200-08 filter & regulator, GAL200-08 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.

Size Class & Flow Envelope

  • GAFC2001/8"-1/4" · 1750 L/min
  • GAFC3001/4"-1/2" · 3500 L/min
  • GAFC4003/8"-1/2" · 6000 L/min
  • GAFC5003/4" · 7000 L/min
  • GAFC6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAFC200 · 1/4" · curve to 1750 L/min
One size upGAFC300 (curve to 3500 L/min)
Build orderFilter & regulator → bracket → lubricator

Where the Airtac GAFC Air Service Unit GAFC200C08ASW Is Used

precision_manufacturing

Precision Jig Fixtures

Feed a 1/4in port on a small pneumatic jig or fixture where the 5 um element protects fine metering valves and the automatic drain keeps the line clear during long production runs.

factory

Single Actuator Stations

Power a single cylinder or actuator on a bench assembly station. The 590 g unit mounts easily on a panel or frame, and the 36 cc oil bowl keeps lubrication consistent for light duty cycles.

engineering

Instrument Air Prepping

Prepare air for sensitive instruments or gauges that need fine filtration. The 5 um element removes particles that could clog small orifices, while the regulator holds the set pressure as supply varies.

Is the Airtac GAFC Air Service Unit GAFC200C08ASW the Right Air-Prep Unit?

Choose the GAFC200 body for a 1/4in port and a 25 cc condensate bowl plus 36 cc oil bowl, weighing 590 g. The metal bowl is a build choice; confirm it suits your surroundings, as the catalogue gives no material-specific data. The automatic drain (A) handles wet lines without manual attention, while the 5 um element (W) suits precision valves at the cost of more frequent service. The PT thread carries a circular gauge with an MPa/psi scale, and no reverse-flow valve is fitted. If the line must stay oil-free, omit the lubricator and select a plain GAFR200-08 filter-regulator instead. Spares are orderable as GAFR200-08 and GAL200-08. With a 1.0 MPa max supply, you have about 0.1 MPa of headroom above the 0.9 MPa top of the regulated range, so plan supply pressure accordingly.

Quick checklist

  • ✓ Body size for your peak flow (1/4" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Thread & gauge scale (PT / G / NPT)
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter-regulator first, lubricator last.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Fill the oil bowl with ISO VG 32 or equivalent only.
  • check Drain condensate before the 25 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 590 g unit on its bracket, not on the tubing.

The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR200-08 filter-regulator on that branch instead of the full combination.

Airtac GAFC Air Service Unit GAFC200C08ASW FAQ

The GAFC200C08ASW operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). It has a 25 cc drain bowl and 36 cc oil bowl, weighs 590 g, and is rated for -5 to 70 C. Use ISO VG 32 oil in the lubricator. The 5 um element and automatic drain are fitted, with a circular gauge reading MPa/psi.

The C code specifies a metal bowl for the GAFC200. The catalogue lists PC, metal, and nylon as options, but provides no temperature, chemical, or impact data for any material. The common specification of 1.0 MPa max and -5 to 70 C applies to all bowl types, so confirm the metal bowl suits your specific environment before ordering.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Request a Quote for Airtac GAFC Air Service Unit GAFC200C08ASW

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for GAFC200C08ASW and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.