
The AirTAC GAFC Air Service Unit GAFC200C08ASWK is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
This AirTAC GAFC200C08ASWK is a two-piece F.R.L. combination: a filter-regulator body paired with a lubricator, mounted on a shared T-bracket with quick clamps. The 1/4in port and 590 g mass place it in the compact GAFC200 class, sized for a single actuator or a small jig rather than a machine-wide header.
Air enters the first body where the 5 um element traps fine particles and the regulator sets pressure to 0.15-0.9 MPa (20-130 psi), then the lubricator adds a metered oil mist downstream. The metal bowl holds 25 cc of condensate and the oil bowl 36 cc, so the unit suits a duty cycle where an operator checks it regularly rather than a long-unattended line.
| Model | Airtac GAFC Air Service Unit GAFC200C08ASWK |
|---|---|
| Series | GAFC200 F.R.L. combination |
| Port size | 1/4" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 590 g |
Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code.
| GAFC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAFR200-08 filter & regulator, GAL200-08 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAFC300 (curve to 3500 L/min) |
| Build order | Filter & regulator → bracket → lubricator |
Feed a single pneumatic clamp on a benchtop assembly fixture where the 5 um element protects a small precision valve from fine abrasive dust.
Supply a hand-held screwdriver or nutrunner on a workbench, with the automatic drain handling condensate from a compressor that runs intermittently.
Condition air for a small laboratory test rig that needs regulated pressure and a fine filtration grade before a sensitive pneumatic sensor.
The GAFC200 body with a 1/4in port suits small cylinders and compact tooling; step up to the GAFC300 for a 3/8in or 1/2in port if your flow demand approaches the 1750 L/min envelope plotted for this body at 0.7 MPa inlet. The A code specifies an automatic drain that clears the 25 cc condensate bowl without operator action, ideal for a line that runs through breaks. The metal bowl is a build choice - the shared -5 to 70 C and 1.0 MPa limits apply regardless of material, so confirm it suits your environment. The 5 um element traps finer particles than the standard 40 um grade, at the cost of more frequent element service. A circular gauge is fitted, reading MPa/psi for the default PT thread, and the K code adds the reverse-flow valve. The two units are separately orderable as GAFR200-08 and GAL200-08. With a 1.0 MPa max supply, you have about 0.1 MPa of headroom above the 0.9 MPa top of the regulated range, so plan the supply pressure near the maximum if you need the full output.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR200-08 filter-regulator on that branch instead of the full combination.
The working pressure range is 0.15-0.9 MPa (20-130 psi), with a maximum pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C and must not freeze. The drain bowl holds 25 cc and the oil bowl 36 cc. Recommended lubricant is ISO VG 32. The complete unit weighs 590 g.
The K code indicates the reverse-flow (reflux) valve is fitted to this GAFC200C08ASWK. The catalogue shows it as a separate pneumatic symbol. The two main units are the GAFR200-08 filter-regulator and the GAL200-08 lubricator, both orderable separately.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.