
The AirTAC GAFC Air Service Unit GAFC200C08L is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
This AirTAC GAFC200C08L is a two-piece F.R.L. combination: the filter and regulator share one body, and the lubricator is mounted on the same T-bracket. With a 1/4in port and a 590 g mass, it suits compact machines where panel space is tight and a three-body train would be overkill.
The lower-pressure regulator is set for 0.15-0.4 MPa (20-58 psi), with a 40 um element filtering the air before it reaches the lubricator. The metal bowl is specified by the C code; the catalogue gives no impact or chemical data for bowl materials, so confirm it suits your environment. The circular gauge reads in MPa and psi, and the semi-auto drain dumps condensate on pressure drop while the manual drain works on demand.
| Model | Airtac GAFC Air Service Unit GAFC200C08L |
|---|---|
| Series | GAFC200 F.R.L. combination |
| Port size | 1/4" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 590 g |
Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code.
| GAFC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAFR200-08 filter & regulator, GAL200-08 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAFC300 (curve to 3500 L/min) |
| Build order | Filter & regulator → bracket → lubricator |
Feed a small pneumatic clamp or positioning jig on a benchtop assembly station, where the 1/4in port and lower pressure range keep forces gentle.
Supply a manual press or a small air vise in a maintenance shop, where the 0.15-0.4 MPa range suits delicate operations.
Run a small test rig or a single-acting cylinder in a laboratory setup, where the metal bowl and compact size fit tight spaces.
Choose the GAFC200 body for small actuators, jigs, or single-station machines where the 1/4in port matches existing plumbing. The L type tops out at 0.4 MPa, so if your process may need more than that, step up to the S type (0.15-0.9 MPa) instead. The metal bowl is a build choice, not a performance upgrade; the shared specification of 1.0 MPa max and -5 to 70 C applies to all bowl materials. The 40 um element is standard, and the PT thread brings an MPa/psi gauge scale. The semi-auto drain clears on pressure drop, and the manual drain is there for scheduled service. Spares are GAFR200-08 and GAL200-08, both orderable separately. A 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range, so plan your inlet pressure accordingly.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR200-08 filter-regulator on that branch instead of the full combination.
The GAFC200C08L operates at 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). It works in -5 to 70 C temperatures and needs ISO VG 32 lubricant. The drain bowl holds 25 cc, the oil bowl holds 36 cc, and the unit weighs 590 g.
The C in the code specifies a metal bowl. The catalogue does not print impact, heat, or chemical resistance data for bowl materials, so the choice is about your environment. Confirm the metal suits your surroundings; the pressure and temperature ratings are the same as for PC or nylon bowls.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.