
The AirTAC GAFC Air Service Unit GAFC200C08LNK is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
This AirTAC GAFC200C08LNK is a two-piece F.R.L. combination built for a 1/4in line. The first body houses both the filter and the regulator, so air is cleaned and set to pressure in one step, then the separate lubricator adds a metered oil mist downstream. It weighs 590 g and carries a 25 cc condensate bowl plus a 36 cc oil bowl, with the catalogue flow curve plotted to 1750 L/min at 0.7 MPa inlet.
The lower-pressure regulator is set for 0.15-0.4 MPa (20-58 psi), which suits delicate circuits that must never see high force. A 40 um element handles standard shop air, while the metal bowl is specified by the C code. No gauge is supplied, so the 1/8in gauge connection is where one can be added later, and the reverse-flow valve is fitted as an ordering option.
| Model | Airtac GAFC Air Service Unit GAFC200C08LNK |
|---|---|
| Series | GAFC200 F.R.L. combination |
| Port size | 1/4" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 590 g |
Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFC200 is 1/8" if you add one.
| GAFC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAFR200-08 filter & regulator, GAL200-08 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAFC300 (curve to 3500 L/min) |
| Build order | Filter & regulator → bracket → lubricator |
Feed a small pneumatic press or alignment jig with regulated 0.15-0.4 MPa air, keeping clamping force gentle on delicate parts.
Supply a lab bench with filtered, lubricated air for small actuators or valves that need a low, stable pressure setting.
Power a portable maintenance cart's air tools and cylinders, with the lower pressure range protecting sensitive attachments.
Choose this GAFC200C08LNK when your machine runs on 1/4in air and needs a regulated ceiling of 0.4 MPa. The metal bowl is named by the C code, and the semi-auto drain clears condensate each time pressure drops, with a manual drain for on-demand use. The 40 um element is the standard grade, and the PT thread suits local piping. Since the N after the port means no gauge is fitted, plan to read pressure at the 1/8in connection or add a gauge. For oil-free lines, omit the lubricator and select a plain GAFR200-08 filter-regulator instead; the spares here are GAFR200-08 and GAL200-08. The 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range, so the regulator has ample inlet headroom.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR200-08 filter-regulator on that branch instead of the full combination.
This unit operates at 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It works in -5 to 70 C temperatures and requires ISO VG 32 lubricant. The drain bowl holds 25 cc and the oil bowl 36 cc, with a total weight of 590 g.
The N after the port code specifies no gauge is supplied. The body has a 1/8in gauge connection, so you can add a circular gauge later if you need to read the set pressure directly. The PT thread uses a MPa/psi scale if you fit one.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.