
The AirTAC GAFC Air Service Unit GAFC200C08LNW is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
This AirTAC GAFC200C08LNW is a two-piece F.R.L. combination: a filter-regulator body paired with a lubricator on a shared bracket. Air enters the 1/4" port, gets filtered by the 5 um element and regulated down to the 0.15-0.4 MPa (20-58 psi) lower-pressure band, then oil mist is metered in downstream. The metal bowl holds 25 cc of condensate, while the separate 36 cc oil bowl feeds the lubricator.
The lower-pressure tuning suits delicate circuits that must never see more than 0.4 MPa. Because no gauge ships with this model, the 1/8" gauge connection on the body is where you would add one to read the setpoint. At 590 g, this compact unit mounts easily on small panels or frames without needing extra support from the tubing.
| Model | Airtac GAFC Air Service Unit GAFC200C08LNW |
|---|---|
| Series | GAFC200 F.R.L. combination |
| Port size | 1/4" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 590 g |
Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFC200 is 1/8" if you add one.
| GAFC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAFR200-08 filter & regulator, GAL200-08 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAFC300 (curve to 3500 L/min) |
| Build order | Filter & regulator → bracket → lubricator |
Feed a precision pneumatic regulator or a sensitive diaphragm pump that must not see supply spikes above 0.4 MPa. The lower-pressure band and 5 um element protect delicate internals from both over-pressure and fine particulates.
Supply filtered, regulated air to a lab bench manifold feeding small actuators or air bearings. The 5 um element keeps instrument-grade air clean, while the 0.4 MPa ceiling matches low-pressure experimental setups.
Operate a small clamping fixture or a single-acting cylinder on an assembly bench. The compact 590 g body mounts directly to a fixture frame, and the 25 cc condensate bowl handles moisture from a typical shop compressor.
Choose the GAFC200C08LNW when your line needs 1/4" ports, a 5 um element for finer filtration, and a regulated ceiling of 0.4 MPa. The metal bowl is specified by the C code; the catalogue gives no impact or chemical data for it, so confirm it suits your environment. Both a semi-auto drain (dumps on pressure drop) and a manual drain are fitted, so condensate can be cleared either way. No gauge is supplied, but the 1/8" connection accepts one. The PT thread carries an MPa/psi scale if you add a gauge. Spares are GAFR200-08 and GAL200-08. If your process might ever need more than 0.4 MPa, this L-type unit is the wrong choice - step up to the standard 0.9 MPa version. With a 1.0 MPa max supply, you have about 0.6 MPa of headroom above the 0.4 MPa regulated top, which is comfortable for maintaining a stable setpoint.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR200-08 filter-regulator on that branch instead of the full combination.
This unit operates on air from 0.15 to 0.4 MPa (20-58 psi), with a maximum supply pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C and it must not freeze. It has a 25 cc condensate bowl and a 36 cc oil bowl, weighs 590 g, and uses ISO VG 32 or equivalent lubricant. The 5 um element filters the air before regulation.
The N in the code after the port means no gauge is supplied. The body has a 1/8" gauge connection where you can fit one. If you add a gauge with PT threads, its scale will read in MPa and psi. Without a gauge, you cannot visually confirm the set pressure, so plan to add one if the application requires monitoring.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.