verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAFC200 · F.R.L. Combination (Filter-Regulator + Lubricator)

Airtac GAFC Air Service Unit GAFC200C08LNWK

The AirTAC GAFC Air Service Unit GAFC200C08LNWK is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).

  • TypeF.R.L. combination
  • Port size1/4"
  • Pressure range0.15 - 0.4 MPa (20 - 58 psi)
  • Filtering grade5 µm
  • Bowl materialMetal
  • Drainsemi-auto + manual
  • Pressure gaugeNot fitted
  • Weight590 g
$67.85 $76.12Save 10% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every GAFC200-08 bowl, type and element option on one page All GAFC200-08 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac GAFC Air Service Unit GAFC200C08LNWK

This GAFC200C08LNWK is a two-piece F.R.L. combination: a filter-regulator body paired with a lubricator, mounted on a shared T-bracket with quick clamps. The 1/4in port and 590 g mass place it in the compact class, sized for a single actuator or a small jig rather than a machine-wide header. It carries a 5 um element, so it traps finer particles than the standard 40 um grade, and the metal bowl is specified for this build.

The lower-pressure regulator is set for 0.15-0.4 MPa (20-58 psi), which suits delicate circuits that must never see a higher regulated output. Air is filtered and regulated in the first body, then the lubricator meters oil mist into the flow last, so oil never travels back through the regulator seat. The 25 cc condensate bowl and 36 cc oil bowl are both metal, and the unit carries no gauge, leaving a 1/8in gauge connection available if one is added later.

Airtac GAFC Air Service Unit GAFC200C08LNWK Technical Specifications

ModelAirtac GAFC Air Service Unit GAFC200C08LNWK
SeriesGAFC200 F.R.L. combination
Port size1/4" (PT thread)
Filtering grade5 µm
Pressure range0.15 - 0.4 MPa (20 - 58 psi)
TypeLower pressure
Bowl materialMetal
Drain typeSemi-auto drain + manual drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl25 cc
Capacity of oil bowl36 cc
Recommended lubricantISO VG 32 or equivalent
Weight590 g

Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFC200 is 1/8" if you add one.

Model Code: Airtac GAFC Air Service Unit GAFC200C08LNWK

GAFC200GA200 series F.R.L. unit — sets ports, bowl capacity and weight.
CBowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N).
08Port size 1/4". This body offers 06 = 1/8", 08 = 1/4".
(blank)Drain: Semi-auto drain + manual drain.
LLower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L).
NNo pressure gauge; 1/8" gauge connection.
WFiltering grade 5 µm.
(blank)PT thread; gauge scale MPa / psi.
KReverse-flow (reflux) valve attached.

Constituent units, orderable separately as spares: GAFR200-08 filter & regulator, GAL200-08 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.

Size Class & Flow Envelope

  • GAFC2001/8"-1/4" · 1750 L/min
  • GAFC3001/4"-1/2" · 3500 L/min
  • GAFC4003/8"-1/2" · 6000 L/min
  • GAFC5003/4" · 7000 L/min
  • GAFC6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAFC200 · 1/4" · curve to 1750 L/min
One size upGAFC300 (curve to 3500 L/min)
Build orderFilter & regulator → bracket → lubricator

Where the Airtac GAFC Air Service Unit GAFC200C08LNWK Is Used

precision_manufacturing

Precision pressure setting

Set a downstream regulator to 0.3 MPa for a delicate pneumatic clamp on a benchtop assembly fixture, where the lower-pressure range prevents over-torquing small parts.

science

Laboratory air preparation

Feed a 5 um-filtered, regulated air supply to a lab-scale sorting mechanism that handles lightweight components, with the metal bowl resisting incidental contact in a busy workspace.

handyman

Single-station maintenance

Protect a small indexing table's cylinder from moisture and particulates, with the semi-auto drain clearing condensate on each shift's pressure cycle and the manual drain for scheduled checks.

Is the Airtac GAFC Air Service Unit GAFC200C08LNWK the Right Air-Prep Unit?

Choose this GAFC200C08LNWK when your line needs fine filtration at 5 um and a regulated ceiling of 0.4 MPa - the lower-pressure type tops out there, so confirm the machine never requires more. The metal bowl is a build choice; the shared specification of 1.0 MPa max and -5 to 70 C does not change with material, so verify it suits your surroundings. The semi-auto drain dumps condensate each time pressure drops, with a manual drain for on-demand use, and the reverse-flow (reflux) valve is fitted as an ordering difference. Spares are the GAFR200-08 filter-regulator and GAL200-08 lubricator, both orderable separately. With a 1.0 MPa max supply, you have about 0.6 MPa of headroom above the 0.4 MPa regulated top, so plan the inlet pressure accordingly.

Quick checklist

  • ✓ Body size for your peak flow (1/4" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Thread & gauge scale (PT / G / NPT)
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter-regulator first, lubricator last.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Fill the oil bowl with ISO VG 32 or equivalent only.
  • check Drain condensate before the 25 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 590 g unit on its bracket, not on the tubing.

The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR200-08 filter-regulator on that branch instead of the full combination.

Airtac GAFC Air Service Unit GAFC200C08LNWK FAQ

This F.R.L. combination operates on air with a lower-pressure range of 0.15-0.4 MPa (20-58 psi). Maximum supply pressure is 1.0 MPa (145 psi) and proof pressure is 1.5 MPa (215 psi). It works in -5 to 70 C temperatures, uses ISO VG 32 lubricant, has a 25 cc condensate bowl and a 36 cc oil bowl, and weighs 590 g.

The C code specifies a metal bowl, which is a build choice for this unit; the catalogue does not publish impact or chemical resistance data, so confirm it fits your environment. The N after the port means no gauge is supplied, leaving a 1/8in connection if you want to add one later to read the set pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Request a Quote for Airtac GAFC Air Service Unit GAFC200C08LNWK

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for GAFC200C08LNWK and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.