
The AirTAC GAFC Air Service Unit GAFC200C08S is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
This GAFC200C08S is a two-piece F.R.L. combination: a filter-regulator body paired with a lubricator, mounted on a shared T-bracket with quick clamps. The 1/4in port and 590 g mass suit small jigs and single actuators, and the metal bowl is specified by the C code. The standard pressure range is 0.15-0.9 MPa (20-130 psi), with a 40 um element filtering the line.
The filter and regulator share one body, so air is cleaned and set to pressure before the lubricator adds oil mist downstream. The 25 cc condensate bowl and 36 cc oil bowl define the service interval, and the semi-auto drain dumps on pressure drop while the manual drain works on demand. A circular gauge is fitted, reading MPa/psi for the PT thread.
| Model | Airtac GAFC Air Service Unit GAFC200C08S |
|---|---|
| Series | GAFC200 F.R.L. combination |
| Port size | 1/4" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 590 g |
Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code.
| GAFC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAFR200-08 filter & regulator, GAL200-08 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAFC300 (curve to 3500 L/min) |
| Build order | Filter & regulator → bracket → lubricator |
Power a bench-mounted clamping jig with filtered and regulated air, where the metal bowl resists accidental knocks and the 1/4in port matches compact pneumatic fittings.
Feed one air cylinder on a packaging machine with a controlled oil mist, keeping the actuator lubricated while the regulator holds a stable pressure for consistent motion.
Supply a hand-held air tool at a workbench, using the semi-auto drain to clear condensate automatically on each pressure drop and the manual drain for scheduled maintenance.
Choose this GAFC200C08S for a compact 1/4in line where a metal bowl is preferred. The C code specifies metal, while blank would be PC and N nylon; the common specification of 1.0 MPa max and -5 to 70 C applies to all, so confirm the material suits your surroundings. The drain is semi-auto plus manual, and the S type regulates from 0.15-0.9 MPa (20-130 psi). The 40 um element is standard; a 5 um W option traps finer particles but needs more frequent service. The PT thread carries a MPa/psi gauge scale, and the two units are orderable separately as GAFR200-08 and GAL200-08. With a 1.0 MPa max supply, there is about 0.1 MPa above the 0.9 MPa top of the range, so plan the inlet pressure if you need the full regulated output.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR200-08 filter-regulator on that branch instead of the full combination.
The GAFC200C08S operates on air at 0.15-0.9 MPa (20-130 psi), with a max pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C, and the recommended lubricant is ISO VG 32. It has a 25 cc drain bowl and a 36 cc oil bowl, and weighs 590 g.
The C code specifies a metal bowl, while blank would be PC and N nylon. The catalogue lists the same 1.0 MPa max pressure and -5 to 70 C range for all three materials, so the metal bowl is a build choice rather than a performance upgrade. Confirm the material suits your environment before ordering.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.