
The AirTAC GAFC Air Service Unit GAFC200C08SN is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
This AirTAC GAFC200C08SN is a two-piece F.R.L. combination: a filter-regulator body paired with a lubricator on a shared T-bracket. The metal bowl holds 25 cc of condensate, while the separate oil bowl holds 36 cc, and the whole unit weighs 590 g.
Air enters the 1/4" port, passes through the 40 um filter, and is regulated to 0.15-0.9 MPa (20-130 psi). The lubricator then adds a controlled oil mist downstream. No gauge is fitted, so the 1/8" gauge connection is available for a later addition.
| Model | Airtac GAFC Air Service Unit GAFC200C08SN |
|---|---|
| Series | GAFC200 F.R.L. combination |
| Port size | 1/4" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 590 g |
Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFC200 is 1/8" if you add one.
| GAFC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAFR200-08 filter & regulator, GAL200-08 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAFC300 (curve to 3500 L/min) |
| Build order | Filter & regulator → bracket → lubricator |
Feed a single-acting cylinder on a CNC fixture with regulated air at 0.4 MPa, using the 40 um element to protect the valve from particulates.
Supply a small pneumatic press with 0.6 MPa air, where the metal bowl resists accidental knocks and the manual drain suits a scheduled maintenance routine.
Power a small air bearing or a test fixture needing clean, regulated air at 0.3 MPa, with the lubricator adding a fine oil mist for the pneumatic slide.
Choose the GAFC200C08SN for a compact 1/4" line where a metal bowl is preferred. The semi-auto drain empties on pressure drops, with a manual backup for on-demand use. The standard pressure type suits 0.15-0.9 MPa (20-130 psi) duties, and the 40 um element handles general shop air.
For a finer 5 um element, add a W code; for automatic draining, use the A code. The metal bowl is a build choice, and you should confirm it suits your environment. Spare parts are the GAFR200-08 filter-regulator and GAL200-08 lubricator. With a 1.0 MPa max supply, there is about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR200-08 filter-regulator on that branch instead of the full combination.
The working pressure range is 0.15-0.9 MPa (20-130 psi), with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C. The condensate bowl holds 25 cc, the oil bowl 36 cc, and the unit weighs 590 g. Use ISO VG 32 oil in the lubricator.
The N code after the port means no gauge is supplied, keeping the unit compact and reducing cost. If you need to read the set pressure, the 1/8" gauge connection on the body allows you to add a standard AirTAC gauge later.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.