
The AirTAC GAFC Air Service Unit GAFC200N08ASK is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
This AirTAC GAFC200N08ASK is a two-piece F.R.L. combination: a nylon-bowl filter-regulator body joined to a lubricator on a T-bracket with quick clamps. Air is cleaned and set to pressure in the first body, then the lubricator adds a metered oil mist last, so oil never flows back through the regulator seat.
With a 1/4in port and a 590 g mass, this unit suits small jigs and single actuators. The 25 cc condensate bowl and 36 cc oil bowl set the service rhythm, while the automatic drain clears water without an operator. The circular gauge reads MPa/psi, and the 40 um element handles standard shop air.
| Model | Airtac GAFC Air Service Unit GAFC200N08ASK |
|---|---|
| Series | GAFC200 F.R.L. combination |
| Port size | 1/4" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 590 g |
Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code.
| GAFC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAFR200-08 filter & regulator, GAL200-08 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAFC300 (curve to 3500 L/min) |
| Build order | Filter & regulator → bracket → lubricator |
Feed a small pneumatic jig or fixture with regulated air at 0.15-0.9 MPa, with the automatic drain handling condensate from a wet shop line.
Power one air cylinder on a benchtop assembly station, using the 36 cc oil bowl to lubricate the actuator while the filter keeps grit out.
Mount this 590 g unit on a small machine frame to supply a single valve manifold, with the nylon bowl offering a lightweight build choice.
Choose the GAFC200N08ASK when a 1/4in port and a 590 g body fit your machine. The nylon bowl is a build choice; the shared 1.0 MPa max and -5 to 70 C rating apply to all bowl materials, so confirm nylon suits your surroundings. The automatic drain removes condensate continuously, ideal for wet lines. The standard type regulates 0.15-0.9 MPa (20-130 psi), the gauge reads MPa/psi, and the reverse-flow valve is fitted as an ordering difference. The 40 um element is the default; step to the 5 um W option for finer filtration. Spares are GAFR200-08 and GAL200-08. The 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR200-08 filter-regulator on that branch instead of the full combination.
This unit operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C, and the recommended lubricant is ISO VG 32. It has a 25 cc drain bowl and a 36 cc oil bowl, and weighs 590 g.
The K code specifies a reverse-flow (reflux) valve fitted to the unit, which the catalogue shows as a separate pneumatic symbol. The A code specifies an automatic drain that clears condensate without an operator, making it suitable for unattended operation.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.