AirTAC GF300-15 Filter (GF30015AJ)
The AirTAC AirTAC GF300-15 Filter (GF30015AJ) is a genuine G-series air filter. It separates condensed water and filters particulate from the compressed-air line through a 40 µm element, with PT1/2" ports and a automatic drain. A filter does not set downstream pressure — pair it with a GR regulator, or use a GFR filter regulator, when pressure control is needed.
- TypeAir filter
- Port sizePT1/2"
- Filtering grade40 µm
- DrainAutomatic drain
- Inlet pressure0.15 - 1.0 MPa (22 - 145 psi)
- Bowl materialPC
- ThreadPT
- BracketSupplied without bracket
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GF300-15 Filter (GF30015AJ)
GF30015AJ is an AirTAC G-series GF air filter: filtration only, removing water and particulate from the compressed-air line, with no pressure regulation and no lubrication. This size 300 body has a PT1/2 in port, the standard 40 um element and the A-coded automatic drain that empties the polycarbonate bowl without manual bleeding. The J suffix means no mounting bracket is supplied, so the unit mounts directly by its port, and it is rated for 1.0 MPa (145 psi) maximum working pressure at -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GF filter family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, 40 um standard or 5 um (W) filtration, a choice of differential-pressure, automatic (A) or manual (M) drain, and PT, G (BSPP) or NPT threads. Flow is published as curves rather than a single rated figure, so ask us and we will confirm the datasheet and sizing for your application.
AirTAC GF300-15 Filter (GF30015AJ) Technical Specifications
| Model | AirTAC GF300-15 Filter (GF30015AJ) |
|---|---|
| Series | GF300 air filter |
| Port size | PT1/2" (PT thread) |
| Filtering grade | 40 µm |
| Drain type | Automatic drain |
| Bracket | Supplied without bracket |
| Fluid | Compressed air |
|---|---|
| Inlet pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Bowl material | PC |
| Feature | Low pressure loss |
Specifications follow the official AirTAC G-series air-preparation data. The inlet-pressure band is set by the drain type: automatic and differential-pressure drains run 0.15 - 1.0 MPa, a manual drain runs 0 - 0.9 MPa. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GF300-15 Filter (GF30015AJ)
| GF300 | G-series air filter, 300 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain. Options are differential (blank), automatic (A) or manual (M). |
| J | Supplied without bracket. A bracket ships by default; J orders it without. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
Field order is size, port, drain, bracket, grade, thread — a blank position takes the default. Example: GF300-10AJW is a 300 body, PT3/8", automatic drain, no bracket, 5 µm element, PT thread.
Size Class
- GF200PT1/8" - PT1/4"
- GF300PT1/4" - PT1/2"
- GF400PT3/8" - PT1/2"
- GF600PT3/4" - PT1"
A larger body carries a larger port and passes more air at the same pressure drop. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure. The GF600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GF300 · PT1/2" · 40 µm |
|---|---|
| One size down | GF200 |
| One size up | GF400 |
| Line order | Filter first, then regulator, then lubricator |
Where the AirTAC GF300-15 Filter (GF30015AJ) Is Used
Control cabinet air preparation
Mount by its ports inside a control cabinet ahead of solenoid valves, filtering branch air with automatic drainage while the bracketless body saves panel space.
Process skid instrument air
Fit inline on the instrument-air takeoff of a process skid, where the automatic drain handles condensate and pipework mounting replaces the need for a bracket.
Automated assembly cell supply
Use on the supply to an automated assembly cell, feeding air cylinders and pick-and-place actuators with filtered air that drains itself between shifts.
Is the AirTAC GF300-15 Filter (GF30015AJ) the Right Filter?
Choose the GF size from 200 (1/8-1/4 in), 300 (3/8-1/2 in), 400 (1/2-3/4 in) and 600 (3/4-1 in) against your line and the published flow curve. This configuration pairs the A-coded automatic drain with the J suffix, so it is supplied without a mounting bracket - order the bracketed version if you need panel or wall fixing. The standard 40 um element can be swapped for the W-coded 5 um grade; drain alternatives are the default differential-pressure type and the M-coded manual drain. Thread is PT as standard, with G (BSPP) and NPT orderable as catalogue options. Flow appears only as curves, not a single rating, so ask us to confirm sizing before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/2" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain: differential, automatic or manual
- ✓ Manual drain caps inlet at 0.9 MPa
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Bracket needed, or order with J
Installation & Maintenance Notes
- check Mount vertically, bowl down, and follow the airflow arrow.
- check Put the filter first in the air-preparation line.
- check Keep inlet pressure within 0.15 - 1.0 MPa (22 - 145 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Replace the 40 µm element when pressure loss rises.
The PC bowl must not be cleaned with solvents or exposed to synthetic oils that attack polycarbonate — wipe it with a dry cloth. A filter removes water and particulate only; it does not regulate pressure or add lubrication.
AirTAC GF300-15 Filter (GF30015AJ) FAQ
There is no single rated figure to quote: AirTAC publishes G-series filter flow as performance curves. Send us your working pressure and air demand and we will confirm the datasheet curve and correct sizing on request before you order.
The J suffix deletes the mounting bracket that normally comes with the GF body, so the filter is supplied for direct port mounting. Everything else in the code stays the same: size 300, PT1/2 in port, 40 um element and A-coded automatic drain.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for AirTAC GF300-15 Filter (GF30015AJ)
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7-8 hours.