AirTAC GF600-20 Filter (GF60020JW)
The AirTAC AirTAC GF600-20 Filter (GF60020JW) is a genuine G-series air filter. It separates condensed water and filters particulate from the compressed-air line through a 5 µm element, with PT3/4" ports and a differential-pressure drain. A filter does not set downstream pressure — pair it with a GR regulator, or use a GFR filter regulator, when pressure control is needed.
- TypeAir filter
- Port sizePT3/4"
- Filtering grade5 µm
- DrainDifferential-pressure drain
- Inlet pressure0.15 - 1.0 MPa (22 - 145 psi)
- Bowl materialAluminium alloy
- ThreadPT
- BracketSupplied without bracket
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GF600-20 Filter (GF60020JW)
The GF60020JW is an AirTAC G-series air filter that removes water and particulate from compressed air. It provides filtration only - there is no pressure regulation and no lubrication in this unit. This configuration is the size 600 body with 3/4 inch PT ports, fitted with the finer 5 um filter element (W code) instead of the standard 40 um element, a differential-pressure drain that automatically ejects collected condensate as pressure changes across the element, and no mounting bracket (J code). The bowl on this size 600 unit is aluminium alloy. Maximum working pressure is 1.0 MPa (145 psi), and the operating temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part sold by an authorised distributor. The G-series filter family spans sizes 200, 300, 400 and 600 with a choice of ports, drain types (differential-pressure, automatic or manual), 40 um or 5 um elements, and PT, G or NPT threads. Flow is published as curves rather than a single rated figure, so we confirm flow and datasheet figures on request before you order.
AirTAC GF600-20 Filter (GF60020JW) Technical Specifications
| Model | AirTAC GF600-20 Filter (GF60020JW) |
|---|---|
| Series | GF600 air filter |
| Port size | PT3/4" (PT thread) |
| Filtering grade | 5 µm |
| Drain type | Differential-pressure drain |
| Bracket | Supplied without bracket |
| Fluid | Compressed air |
|---|---|
| Inlet pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Bowl material | Aluminium alloy |
| Feature | Low pressure loss |
Specifications follow the official AirTAC G-series air-preparation data. The inlet-pressure band is set by the drain type: automatic and differential-pressure drains run 0.15 - 1.0 MPa, a manual drain runs 0 - 0.9 MPa. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GF600-20 Filter (GF60020JW)
| GF600 | G-series air filter, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain. Options are differential (blank), automatic (A) or manual (M). |
| J | Supplied without bracket. A bracket ships by default; J orders it without. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
Field order is size, port, drain, bracket, grade, thread — a blank position takes the default. Example: GF300-10AJW is a 300 body, PT3/8", automatic drain, no bracket, 5 µm element, PT thread.
Size Class
- GF200PT1/8" - PT1/4"
- GF300PT1/4" - PT1/2"
- GF400PT3/8" - PT1/2"
- GF600PT3/4" - PT1"
A larger body carries a larger port and passes more air at the same pressure drop. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure. The GF600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GF600 · PT3/4" · 5 µm |
|---|---|
| One size down | GF400 |
| Line order | Filter first, then regulator, then lubricator |
Where the AirTAC GF600-20 Filter (GF60020JW) Is Used
CNC machine tool air supply
Installed on the 3/4 inch compressed-air drop feeding a CNC machining centre, the 5 um element strips water and fine particulate before air reaches tool-changer and spindle-clamp actuators, with the differential drain handling condensate automatically.
Laboratory air ring main
Mounted on the main air ring main serving a laboratory or testing facility, this large-port filter cleans the supply feeding bench valves and analytical equipment, with the finer 5 um grade protecting sensitive instruments.
Bottling line air preparation
Fitted at the head of the air supply to a bottling or packaging line, the size 600 body handles the high draw of multiple pneumatic stations while the differential-pressure drain keeps condensate out of the distribution piping.
Is the AirTAC GF600-20 Filter (GF60020JW) the Right Filter?
Size 600 with 3/4 inch PT ports is the largest step in the G-series filter range, so start here when your line demands high air volume - but match the size to the required flow, not just the pipe diameter. The W code gives you the 5 um element; choose it when downstream valves, cylinders or instruments need cleaner air than the standard 40 um element delivers. The differential-pressure drain works automatically with no operator input; if your compressor cycles or the filter sits where condensate volume is high, ask about the automatic or manual drain variants. Thread is PT as standard, with G (BSPP) and NPT available as catalogue options, and the J code means no bracket - order the bracket separately if you want panel mounting. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT3/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain: differential, automatic or manual
- ✓ Manual drain caps inlet at 0.9 MPa
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Bracket needed, or order with J
Installation & Maintenance Notes
- check Mount vertically, bowl down, and follow the airflow arrow.
- check Put the filter first in the air-preparation line.
- check Keep inlet pressure within 0.15 - 1.0 MPa (22 - 145 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Replace the 5 µm element when pressure loss rises.
The aluminium-alloy bowl on the GF600 suits harsher environments than a PC bowl. A filter removes water and particulate only; it does not regulate pressure or add lubrication.
AirTAC GF600-20 Filter (GF60020JW) FAQ
AirTAC publishes filter flow as performance curves rather than a single rated figure, so we do not quote one number. Send us your application details and we will confirm the flow and the full datasheet for the GF60020JW on request before you order.
In the GF code, W selects the finer 5 um filter element instead of the standard 40 um grade, and J means the mounting bracket is omitted. If you prefer the standard 40 um grade or need the bracket, those variants are available in the same size 600, 3/4 inch port configuration.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GF600-20 Filter (GF60020JW)
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7-8 hours.