AirTAC GF600-25 Filter (GF60025J)
The AirTAC AirTAC GF600-25 Filter (GF60025J) is a genuine G-series air filter. It separates condensed water and filters particulate from the compressed-air line through a 40 µm element, with PT1" ports and a differential-pressure drain. A filter does not set downstream pressure — pair it with a GR regulator, or use a GFR filter regulator, when pressure control is needed.
- TypeAir filter
- Port sizePT1"
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Inlet pressure0.15 - 1.0 MPa (22 - 145 psi)
- Bowl materialAluminium alloy
- ThreadPT
- BracketSupplied without bracket
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GF600-25 Filter (GF60025J)
The AirTAC GF600 series is a compressed-air filter: it removes water and particulate from the air line. It does not regulate pressure and does not lubricate. This GF60025J is the large 600 frame with a 1" PT (BSPT-type) port, standard 40 um filtration element and the default differential-pressure drain, which uses flow-dependent pressure difference to spit condensate from the bowl. The J suffix means no mounting bracket is supplied. The bowl on 600-size filters is aluminium alloy.
This is a genuine AirTAC part. Max working pressure is 1.0 MPa (145 psi), operating temperature range is -5 to 70 C (non-freezing), and the medium is compressed air only. The GF series is also offered in 200, 300 and 400 sizes with 5 um (W) elements, automatic or manual drains, and G (BSPP) or NPT threads. Bracketless versions like this one let you panel- or manifold-mount on your own hardware. Flow is published as curves, so we confirm exact figures and datasheets on request.
AirTAC GF600-25 Filter (GF60025J) Technical Specifications
| Model | AirTAC GF600-25 Filter (GF60025J) |
|---|---|
| Series | GF600 air filter |
| Port size | PT1" (PT thread) |
| Filtering grade | 40 µm |
| Drain type | Differential-pressure drain |
| Bracket | Supplied without bracket |
| Fluid | Compressed air |
|---|---|
| Inlet pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Bowl material | Aluminium alloy |
| Feature | Low pressure loss |
Specifications follow the official AirTAC G-series air-preparation data. The inlet-pressure band is set by the drain type: automatic and differential-pressure drains run 0.15 - 1.0 MPa, a manual drain runs 0 - 0.9 MPa. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GF600-25 Filter (GF60025J)
| GF600 | G-series air filter, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain. Options are differential (blank), automatic (A) or manual (M). |
| J | Supplied without bracket. A bracket ships by default; J orders it without. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
Field order is size, port, drain, bracket, grade, thread — a blank position takes the default. Example: GF300-10AJW is a 300 body, PT3/8", automatic drain, no bracket, 5 µm element, PT thread.
Size Class
- GF200PT1/8" - PT1/4"
- GF300PT1/4" - PT1/2"
- GF400PT3/8" - PT1/2"
- GF600PT3/4" - PT1"
A larger body carries a larger port and passes more air at the same pressure drop. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure. The GF600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GF600 · PT1" · 40 µm |
|---|---|
| One size down | GF400 |
| Line order | Filter first, then regulator, then lubricator |
Where the AirTAC GF600-25 Filter (GF60025J) Is Used
CNC machining centre air inlet
Installed on the 1" shop-air feed into a CNC machining centre's pneumatic cabinet, the GF60025J removes water and coarse particulate before the air reaches tool-changer cylinders and chuck actuators.
Control cabinet manifold feed
Mounted directly onto a customer-built manifold plate without a bracket, this bracketless filter conditions the air feeding a bank of process-control valves and I/P converters in a water-treatment control panel.
Assembly cell actuator supply
Placed at the header drop feeding clamp and press-fit cylinders in an automotive sub-assembly cell, the filter keeps rust and condensate out of the 1" supply line serving multiple actuators.
Is the AirTAC GF600-25 Filter (GF60025J) the Right Filter?
Choose this 600/1" frame when your air demand needs the largest G-series port - for smaller 1/4" to 3/4" lines, the 200-400 sizes are the usual fit. Flow is published as curves rather than a single rating, so ask us to confirm sizing against your application before ordering. The standard 40 um element protects general pneumatic equipment; specify the W (5 um) suffix where finer filtration is needed. This unit uses the default differential-pressure drain - if you want hands-free condensate removal, the A (automatic) suffix; for scheduled draining, the M (manual) suffix. Thread is PT as standard, with G (BSPP) and NPT versions orderable. The J suffix omits the bracket; add the blank-suffix version if you want one supplied.
Quick checklist
- ✓ Body size for your peak flow (PT1" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain: differential, automatic or manual
- ✓ Manual drain caps inlet at 0.9 MPa
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Bracket needed, or order with J
Installation & Maintenance Notes
- check Mount vertically, bowl down, and follow the airflow arrow.
- check Put the filter first in the air-preparation line.
- check Keep inlet pressure within 0.15 - 1.0 MPa (22 - 145 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Replace the 40 µm element when pressure loss rises.
The aluminium-alloy bowl on the GF600 suits harsher environments than a PC bowl. A filter removes water and particulate only; it does not regulate pressure or add lubrication.
AirTAC GF600-25 Filter (GF60025J) FAQ
AirTAC does not publish a single rated-flow number for the GF series - flow is given as performance curves. We therefore avoid quoting a fixed figure here; tell us your line size and demand and we will confirm the datasheet curves and correct sizing on request.
J means no mounting bracket is included - the filter is intended for panel, manifold or customer-supplied bracket mounting. The drain is the default differential-pressure type: it automatically blows down collected condensate when flow-related pressure difference across the filter rises. If you prefer an always-automatic float drain or a hands-on manual drain, the A and M suffix versions share the same 600/1" frame.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GF600-25 Filter (GF60025J)
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7-8 hours.