verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GL300 · Air Lubricator (oil-mist lubrication)

Airtac GL Air Lubricators GL30010JG

The AirTAC GL Air Lubricators GL30010JG is a genuine G-series air lubricator. It meters an oil mist into the compressed-air line so cylinders, valves and air tools downstream stay lubricated, with PT3/8" ports and a pc oil bowl. A lubricator does not filter or regulate — it goes last in the line, after the filter and the regulator.

  • TypeAir lubricator
  • Port sizePT3/8"
  • Inlet pressure0.05 - 1.0 MPa
  • Oil bowlPC
  • ThreadG (BSPP)
  • BracketSupplied without bracket
$37.54 Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every GL300 port, bracket and thread option on one page All GL300 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac GL Air Lubricators GL30010JG

The GL30010JG is an AirTAC GL300 air lubricator, the lubrication-only member of the G-series air-treatment line. It adds a fine oil mist to the compressed air stream so downstream cylinders, air motors, valves and other pneumatic components receive continuous lubrication. This unit is built for the GL300 size with a G3/8 (BSPP) port, is rated for a maximum inlet pressure of 1.0 MPa (145 psi), operates from -5 to 70 C in non-freezing conditions, and carries a polycarbonate bowl. The J suffix in the code means this configuration is supplied without a mounting bracket.

This is a genuine AirTAC part. The GL family is offered in sizes 200, 300, 400 and 600 with matching port sizes and a choice of PT (standard), G (BSPP) or NPT thread. Flow figures for the GL series are published as curves rather than a single rating, so we confirm the datasheet and flow data for your application on request.

Airtac GL Air Lubricators GL30010JG Technical Specifications

ModelAirtac GL Air Lubricators GL30010JG
SeriesGL300 air lubricator
Port sizePT3/8" (G (BSPP) thread)
Oil bowl materialPC
BracketSupplied without bracket
FluidCompressed air
Inlet pressure0.05 - 1.0 MPa (7 - 145 psi)
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
FunctionOil-mist lubrication only

Specifications follow the official AirTAC G-series air-preparation data. A lubricator has no drain, no regulating mechanism, no gauge and no filter element, so none of those figures apply. Oil grade, bowl capacity, flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: Airtac GL Air Lubricators GL30010JG

GL300G-series air lubricator, 300 body — sets the port range.
10Port size PT3/8". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2".
JSupplied without bracket. A bracket ships by default; J orders it without.
GG (BSPP) thread. PT is the default; G is BSPP and T is NPT.

The lubricator has the shortest code of the six G-series subfamilies — size, port, bracket, thread. There is no drain, pressure-type, gauge or filtering-grade position. Example: GL300-10JG is a 300 body, PT3/8", no bracket, G (BSPP) thread.

Size Class

  • GL200PT1/8" - PT1/4"
  • GL300PT1/4" - PT1/2"
  • GL400PT3/8" - PT1/2"
  • GL600PT3/4" - PT1"

A larger body carries a larger port and passes more air. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GL600 uses an aluminium-alloy oil bowl; the 200, 300 and 400 bodies use PC.

This modelGL300 · PT3/8"
One size downGL200
One size upGL400
Line orderFilter first, then regulator, lubricator last

Where the Airtac GL Air Lubricators GL30010JG Is Used

precision_manufacturing

Pneumatic punch press cylinder feed

Installed on the air supply to the clamping and punching cylinders of a metal stamping press, keeping the seals and sliding surfaces of high-cycle cylinders continuously oil-film protected during shift-long operation.

conveyor_belt

Packaging conveyor air motors

Mounted ahead of the vane air motors that drive a bottling or carton-packing conveyor, delivering a steady oil mist so the motor vanes and bearings stay lubricated throughout each production run.

settings_input_component

Pneumatic valve manifold supply

Fitted upstream of a solenoid valve manifold on an automated assembly machine, so every directional valve and actuator branch downstream of the unit receives lubricated air as standard.

Is the Airtac GL Air Lubricators GL30010JG the Right Lubricator?

Pick the GL size by the port and flow step your line needs: GL200, GL300, GL400 and GL600 move up through larger ports and higher flow. This GL30010JG sits at 3/8 in with a G (BSPP) thread; if your piping runs PT or NPT, the same lubricator is available in those thread options as separate order codes. A bracket is optional in this series and the J code here means none is fitted, so add a bracketed variant if you want panel or surface mounting. Because rated flow is published only as curves and not as a single figure, ask us to confirm sizing for this model against your air consumption before ordering.

Quick checklist

  • ✓ Body size for your peak flow (PT3/8" here)
  • ✓ Downstream equipment actually needs oil
  • ✓ Thread PT, G (BSPP) or NPT
  • ✓ Bracket needed, or order with J
  • ✓ Bowl material: PC, or aluminium on GL600
  • ✓ Fit after the filter and regulator
Ask an Engineer

Installation & Maintenance Notes

  • check Fit last in the line: filter, then regulator, then lubricator.
  • check Mount vertically, bowl down, following the airflow arrow.
  • check Keep inlet pressure within 0.05 - 1.0 MPa.
  • check Use only oil approved for pneumatic lubricators.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Check the oil level regularly; top up before it runs dry.

The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The oil mist travels downstream, so if any branch of the line must stay oil-free, take that branch off before the lubricator. We will confirm the recommended oil grade from the factory datasheet on request.

Airtac GL Air Lubricators GL30010JG FAQ

AirTAC publishes flow for the GL series as curves rather than a single rated figure, so we do not quote a fixed number. Ask us for the datasheet and we will confirm the flow curve data for the GL300 at your operating pressure so you can size it against your air consumption before ordering.

The trailing G means this unit has a G (BSPP) thread on its 3/8 in port. PT is the standard thread for the GL series, and G and NPT are catalogue thread options ordered as separate codes. All are specification choices in the catalogue, not delivery conditions.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Request a Quote for Airtac GL Air Lubricators GL30010JG

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7-8 hours.

Thank you. We received your request for GL30010JG and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.