Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X150-100S
The AirTAC JSIJ100~125 Adjustable Cylinder JSIJ100X150-100S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø100mm bore and 150mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke150 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X150-100S
The extruded hard-anodized aluminium barrel keeps the total length shorter than a same-bore ISO 15552 unit, saving valuable machine space. A G1/2 port handles the air volume needed for the 32 mm rod.
The external stop screw lets you trim the extend stroke by up to 100 mm on-site, dropping the usable extension from the 150 mm maximum down to 50 mm without swapping the cylinder. This on-site end-position tuning means you can standardize spare parts across multiple stroke variants.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X150-100S Technical Specifications
| Model | Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X150-100S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 719 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X150-100S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X150-100S Is Used
Press Fit Tuning
Dial in the exact 50 to 150 mm extend contact point for seating bearings without machining custom spacers.
Variable Diverter Arm
Adjust the push distance on a sorting line to handle different package sizes on the fly.
Pallet Stop Mechanism
Set the precise end-stop height for varying pallet loads using the external 100 mm window.
Is the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X150-100S the Right Cylinder?
The adjustable window shines when you need to fine-tune a clamping distance on the shop floor or share one spare SKU across several slightly different stations. You can mount it via FA, LB, TC, TCM1, or TCM2 brackets. The built-in magnet (-S) supports CMSE and DMSE sensors in the side grooves. Because the 150 mm stroke can generate side loads, always guide the rod to prevent binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X150-100S FAQ
At 0.5 MPa it pushes 3927 N and pulls 3574 N. At 0.7 MPa it pushes 5497 N and pulls 5003 N. The theoretical maximum is 801 kgf at 1.0 MPa. It uses a G1/2 port, a 32 mm rod, and has 33 mm adjustable air cushions at both ends.
The 150 mm nominal stroke is the maximum extension. An external stop screw lets you shorten the extend stroke on-site by up to 100 mm, giving a usable range of 50 to 150 mm. The retract end remains fixed. This mechanism sets the end position and does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X150-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.