Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X160-10S
The AirTAC JSIJ100~125 Adjustable Cylinder JSIJ100X160-10S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø100mm bore and 160mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke160 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X160-10S
The hard-anodized extruded aluminum profile barrel makes it shorter and more compact than a same-bore ISO 15552 cylinder. It carries a G1/2 port and a 32 mm rod with an M26x1.5 thread.
The external adjuster lets you shorten the extend stroke on-site by up to 10 mm, giving a usable range of 150-160 mm without changing the cylinder itself. You can drop CMSE or DMSE reed and electronic switches directly into the side grooves to confirm end positions.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X160-10S Technical Specifications
| Model | Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X160-10S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 160 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 719 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X160-10S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X160-10S Is Used
Press Fit Tuning
Use the 10 mm extend adjuster to dial in the exact bottoming position for seating bearings without reworking machine stops.
Transfer Diversion
Shift packages on a belt by fine-tuning the 150-160 mm extend reach on-site to match varying product widths perfectly.
Is the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X160-10S the Right Cylinder?
This 100 mm model hits a strong middle ground at 3927 N. The 10 mm extend-shortening window is ideal for fine-tuning end positions on-site or sharing a single spare across slightly different stroke variants. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2 brackets. Because this unit has the -S magnet, it is fully ready for CMSE/DMSE sensors. For any stroke at or over 300 mm, always guide the load to prevent rod side-loading and premature seal wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X160-10S FAQ
At 0.5 MPa it pushes 3927 N and pulls 3574 N. At 0.7 MPa it pushes 5497 N and pulls 5003 N. The theoretical maximum force is 801 kgf at 1.0 MPa. This 100 mm bore cylinder uses a G1/2 air port and features a 32 mm rod with an M26x1.5 thread.
The nominal 160 mm stroke is the maximum length. An external stop screw lets you shorten the extend stroke by up to 10 mm on-site, yielding a usable extend range of 150-160 mm. The retract end remains fixed. Note that this stop only sets the end position; it does not lock the load on air loss, so you need an external rod lock or pilot-operated check valve for holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X160-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.