Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X160-30
The AirTAC JSIJ100~125 Adjustable Cylinder JSIJ100X160-30 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø100mm bore and 160mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke160 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X160-30
The hard-anodized aluminium profile body is a JIS build, making it shorter and more compact than a same-bore ISO 15552 cylinder. It uses a G1/2 port and an M26x1.5 rod thread.
The external stop screw provides a 30 mm window to shorten the extend stroke on site, giving a usable forward range of 130 to 160 mm while the retract end stays fixed. You can fine-tune the end position without changing the cylinder itself. Note that this SKU lacks a magnet, so it cannot take a CMSE or DMSE sensor; the -S variant is required for switching.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X160-30 Technical Specifications
| Model | Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X160-30 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 160 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 719 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X160-30
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X160-30 Is Used
Press Fit Tuning
Dial in the exact 130 to 160 mm extend position for seating bearings without swapping the actuator.
Divert Gate Stroke
Adjust the extend stop on site to change a sorting flap reach by up to 30 mm for varied package sizes.
Is the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X160-30 the Right Cylinder?
The 30 mm adjuster is ideal for sharing a spare across stroke variants or tuning the end position on site. Mounting options include FA, LB, TC, TCM1 and TCM2. Because the 160 mm stroke is under 300 mm, side-load risk is low, but always guide the load for rigid stability. Remember this plain cylinder does not hold load on air loss; use an external rod lock or pilot-operated check valve for suspended loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X160-30 FAQ
At 0.5 MPa it pushes 3927 N and pulls 3574 N. At 0.7 MPa it pushes 5497 N and pulls 5003 N. The theoretical maximum is 801 kgf at 1.0 MPa. The air port is G1/2.
The nominal 160 mm extend stroke is the maximum. An external stop screw lets you shorten the forward stroke by up to 30 mm on site, yielding a 130 to 160 mm usable range. The retract end is fixed, and this stop only sets position; it is not a load lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X160-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.