Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X160-40S
The AirTAC JSIJ100~125 Adjustable Cylinder JSIJ100X160-40S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø100mm bore and 160mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke160 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X160-40S
The hard-anodized aluminium extruded barrel contains no tie rods, and the G1/2 port feeds a 32 mm piston rod with an M26x1.5 thread. A built-in magnet (-S) allows CMSE or DMSE sensors to drop directly into the side grooves for position detection.
The external stop screw lets you shorten the extend stroke on-site by up to 40 mm, giving a usable forward range of 120 to 160 mm while the retract end remains fixed. Adjustable 33 mm air cushions at both ends absorb kinetic energy near the stroke limits, though a plain pneumatic cylinder does not hold load on air loss—use an external rod lock or pilot-operated check valve for suspended loads.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X160-40S Technical Specifications
| Model | Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X160-40S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 160 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 719 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X160-40S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X160-40S Is Used
Press Fit Tuning
Dial in the exact 120 to 160 mm extend position on-site to seat bearings without bottoming out the tooling.
Pallet Stop Adjustment
Shorten the forward stroke by up to 40 mm to accommodate varying pallet depths while using the same cylinder body.
Is the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X160-40S the Right Cylinder?
The 40 mm adjustable window is highly useful when you need to share a single spare across multiple stroke variants or dial in a precise end position on the machine. You can mount it via basic, FA, LB, TC, TCM1, or TCM2 brackets. Because this SKU includes the -S magnet, it is ready for CMSE/DMSE sensors. For any stroke at or above 300 mm, always guide the load to prevent side-load damage to the rod seals.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X160-40S FAQ
The theoretical maximum force is 801 kgf at 1.0 MPa.
The nominal 160 mm extend stroke is the maximum. An external stop screw lets you shorten the forward stroke by up to 40 mm on-site, yielding a usable extend range of 120 to 160 mm. The retract end is fixed, and this stop only sets position—it is not a load lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X160-40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.