Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X175-100
The AirTAC JSIJ100~125 Adjustable Cylinder JSIJ100X175-100 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø100mm bore and 175mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke175 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X175-100
The hard-anodized aluminium extrusion omits tie rods entirely, keeping the build clean and rigid.
The dash-100 code means an external stop screw lets you shorten the extend stroke on-site by up to 100 mm, dropping the usable forward travel from the 175 mm maximum down to 75 mm without swapping the cylinder. The retract end stays fixed, and the G1/2 port feeds the 32 mm rod. Because this SKU lacks the -S magnet, it cannot take a CMSE or DMSE sensor. Note that the adjustable air cushions only decelerate the load; use an external rod lock or pilot-operated check valve if you need to hold position against air loss.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X175-100 Technical Specifications
| Model | Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X175-100 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 719 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X175-100
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X175-100 Is Used
Press Fit Tuning
Dial in the exact 75 to 175 mm extend reach for seating heavy bearings without machining custom spacers.
Multi-Length Divert
Adjust the extend stop on-site to push different carton sizes from a single pneumatic divert station.
Pallet Stop Logic
Shift the forward stop position by up to 100 mm to handle mixed pallet heights on the same line.
Is the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X175-100 the Right Cylinder?
The 100 mm adjustable window is ideal when you need to fine-tune the extend end position on-site or want one shared spare across multiple stroke variants. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2. For any stroke at or over 300 mm, always guide the load to prevent side-load damage to the rod seals.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X175-100 FAQ
At 0.5 MPa it pushes 3927 N and pulls 3574 N. At 0.7 MPa it pushes 5497 N and pulls 5003 N. The theoretical maximum is 801 kgf at 1.0 MPa. It uses a G1/2 air port and a 32 mm rod with an M26x1.5 thread.
The 175 mm nominal stroke is the maximum forward travel. The external adjuster lets you shorten the extend stroke on-site by up to 100 mm, giving a usable range of 75 to 175 mm. The retract end is fixed, and the stop sets position but does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X175-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.