Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X175-20
The AirTAC JSIJ100~125 Adjustable Cylinder JSIJ100X175-20 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø100mm bore and 175mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke175 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X175-20
The hard-anodized aluminium profile barrel keeps the build rigid without external rods. Air connects via a G1/2 port.
The -20 code means an external stop screw lets you shorten the extend stroke on-site by up to 20 mm, giving a usable range of 155 to 175 mm. You fine-tune the end position without swapping the cylinder, while the retract end stays fixed. This plain SKU lacks a magnet and cannot take a CMSE or DMSE sensor. Note that the adjustable stop sets position only; it is not a load lock, so fit an external rod lock or pilot-operated check valve if you need to hold a load against air loss.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X175-20 Technical Specifications
| Model | Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X175-20 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 719 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X175-20
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X175-20 Is Used
Press Stroke Tuning
Dial in the exact 155 to 175 mm extend reach on a stamping station without machining new spacers or changing the whole actuator.
Is the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X175-20 the Right Cylinder?
Stepping down to an 80 mm bore drops the 0.5 MPa push force to 2513 N, whereas a 125 mm bore raises it to 6136 N. The 100 mm size hits a sweet spot for medium-heavy machinery. The -20 mm adjuster is ideal when you need on-site end-position tuning across shared spare cylinders with slightly different stroke variants. Mounting options include FA, LB, TC, TCM1, and TCM2. Because this is a non-magnet SKU, position sensing is unavailable; add the -S variant for CMSE/DMSE switches. For any stroke at or above 300 mm, always guide the load to prevent side-load damage to the front cover.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X175-20 FAQ
At 0.5 MPa it pushes 3927 N and pulls 3574 N. At 0.7 MPa it pushes 5497 N and pulls 5003 N. The theoretical maximum force is 801 kgf at 1.0 MPa. The air port size is G1/2.
The nominal 175 mm stroke is the maximum. An external stop screw lets you shorten the extend stroke on-site by up to 20 mm, yielding a usable extend range of 155 to 175 mm. The retract end remains fixed, and this stop is for positioning only, not load holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X175-20
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.