Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X175-20S
The AirTAC JSIJ100~125 Adjustable Cylinder JSIJ100X175-20S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø100mm bore and 175mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke175 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X175-20S
The extruded hard-anodized aluminium barrel leaves out external rods, making the unit shorter than an equivalent ISO 15552 cylinder. A G1/2 port handles the air supply, while the -S suffix means a built-in piston magnet is present for CMSE or DMSE switches.
The external adjuster lets you shorten the extend stroke on-site by up to 20 mm, giving a usable range of 155 to 175 mm without swapping the cylinder. This on-site tuning is ideal for sharing spares across slightly different machine variants.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X175-20S Technical Specifications
| Model | Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X175-20S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 719 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X175-20S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X175-20S Is Used
Press Stroke Tuning
Dial in the exact 155 to 175 mm extend reach on a light assembly press without machining new spacers.
Pallet Stopper Gate
Adjust the stop position on the fly to handle slightly different pallet depths on a conveyor line.
Vertical Lift Clamp
Lift a 200 kg fixture vertically and fine-tune the lower clamp position safely within the 20 mm window.
Is the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X175-20S the Right Cylinder?
The adjustable stroke shines when you need to fine-tune an end position on the factory floor or want a single spare part covering several stroke variants. You can mount it via FA, LB, TC, TCM1, or TCM2 brackets. The included magnet supports CMSE/DMSE sensors. For any stroke over 300 mm, always use a guide rail to prevent side-load wear on the rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X175-20S FAQ
At 0.5 MPa it pushes 3927 N and pulls 3574 N. At 0.7 MPa it pushes 5497 N and pulls 5003 N. The theoretical maximum is 801 kgf at 1.0 MPa. The air port is G1/2.
The nominal 175 mm extend stroke is the maximum. The external stop screw lets you shorten that extend stroke by up to 20 mm on-site, yielding a usable range of 155 to 175 mm. The retract end is fixed. This stop only sets the end position; it is not a load lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X175-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.