Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X200-50
The AirTAC JSIJ100~125 Adjustable Cylinder JSIJ100X200-50 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø100mm bore and 200mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke200 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X200-50
Its hard-anodized aluminium barrel keeps the build more compact than a same-bore ISO 15552 unit, while the G1/2 port feeds the 32 mm rod for robust actuation.
The external adjuster lets you shorten the 200 mm extend stroke on-site by up to 50 mm, giving a usable range of 150-200 mm without swapping the cylinder. Note that this specific SKU lacks a magnet and cannot take CMSE/DMSE sensors.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X200-50 Technical Specifications
| Model | Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X200-50 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 719 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X200-50
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X200-50 Is Used
Press Fit Tuning
Fine-tune the 150-200 mm extend stroke on-site to set precise insertion depths for bearing presses without machining new stops.
Divertor Adjustment
Alter the extend reach by up to 50 mm to accommodate different package widths on a sorting line using the same actuator.
Is the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X200-50 the Right Cylinder?
When sizing this 100 mm bore, step down to an 80 mm cylinder if your 0.5 MPa push requirement falls below 2513 N, or step up to 125 mm for demands exceeding 6136 N. The 50 mm adjuster window is ideal for sharing a single spare across multiple stroke variants or fine-tuning the end position on the machine. You can mount it via FA, LB, TC, TCM1, or TCM2 brackets. Because this SKU has no -S magnet, position sensing is impossible here. For any stroke over 300 mm, always use a guide rail to prevent rod side-loading damage.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X200-50 FAQ
At 0.5 MPa it pushes 3927 N and pulls 3574 N. At 0.7 MPa it pushes 5497 N and pulls 5003 N. The theoretical maximum is 801 kgf at 1.0 MPa. It uses a G1/2 port, a 32 mm rod, and has 33 mm adjustable air cushions at both ends.
The nominal 200 mm stroke is the maximum. An external stop screw lets you shorten the extend stroke by up to 50 mm on-site, yielding a usable range of 150-200 mm. The retract end is fixed. This mechanism only sets the end position; it does not lock the load, so use an external rod lock or pilot-operated check valve if you need to hold a load against air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X200-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.