Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X200-75
The AirTAC JSIJ100~125 Adjustable Cylinder JSIJ100X200-75 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø100mm bore and 200mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke200 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X200-75
The hard-anodized aluminum barrel keeps the build clean without external tie rods, and the G1/2 port matches the bore's high flow demands.
A 75 mm external stop screw window lets you trim the extend stroke anywhere from 200 mm down to 125 mm directly on-site, perfect for dialing in end positions without swapping the whole cylinder. Note that this specific SKU lacks a magnet, so it cannot take CMSE or DMSE sensors.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X200-75 Technical Specifications
| Model | Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X200-75 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 719 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X200-75
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X200-75 Is Used
Press Stroke Tuning
Dial in the exact 125 to 200 mm extend reach on a light assembly press without machining new spacers or changing the actuator.
Variable Transfer Stops
Adjust the stop block position on the fly for mixed-product conveying lines, accommodating different package sizes on the same line.
Pallet Positioning
Fine-tune the extend endpoint to align heavy 200 kg pallets precisely before banding, using the 75 mm on-site adjustment window.
Is the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X200-75 the Right Cylinder?
When sizing this 100 mm bore, stepping down to an 80 mm drops the 0.5 MPa push force to 2513 N, while moving up to a 125 mm raises it to 6136 N. The adjustable stroke is ideal for sharing one spare across multiple stroke variants or fine-tuning a machine setup on the floor. You can mount it via FA, LB, TC, TCM1, or TCM2 brackets. Because this is a non-S SKU, it cannot accept position sensors. For any stroke at or over 300 mm, always use a guide rail to prevent side-load damage to the rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X200-75 FAQ
At 0.5 MPa it pushes 3927 N and pulls 3574 N. At 0.7 MPa it pushes 5497 N and pulls 5003 N. The theoretical max force is 801 kgf at 1.0 MPa. It uses a 32 mm rod, an M26x1.5 rod thread, a G1/2 port, and has 33 mm adjustable air cushions at both ends.
The nominal 200 mm extend stroke is the maximum. An external stop screw lets you shorten the extend distance by up to 75 mm on-site, giving a usable extend range of 125 to 200 mm. The retract end remains fixed. This mechanism sets the end position and does not lock the load; for load holding on air loss you need an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X200-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.