Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X200-75S
The AirTAC JSIJ100~125 Adjustable Cylinder JSIJ100X200-75S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø100mm bore and 200mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke200 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X200-75S
The hard-anodized aluminum barrel makes it shorter and more compact than a same-bore ISO 15552 unit.
The external stop screw lets you trim the extend stroke on-site by up to 75 mm, giving a usable range of 125 to 200 mm without swapping the cylinder. Because this is an -S SKU, a built-in piston magnet works directly with CMSE or DMSE switches in the side grooves. The retract end remains fixed, and the G1/2 port handles the air volume needed for high-speed cycling.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X200-75S Technical Specifications
| Model | Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X200-75S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 719 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X200-75S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X200-75S Is Used
Press Tonnage Trimming
Dial in the exact 125 to 200 mm extend reach on a light-duty assembly press without machining new hard stops.
Variable Transfer Stops
Adjust the extend length on-site to handle different pallet sizes on a single heavy-duty transfer line.
Layer Push-Off Tuning
Fine-tune the push-off distance for mixed-height palletizing tasks while maintaining high push force.
Is the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X200-75S the Right Cylinder?
The adjustable-stroke mechanism shines when you need to fine-tune end positions across multiple machines or keep one spare cylinder for various stroke lengths. You can mount it using FA, LB, TC, TCM1, or TCM2 brackets. For any stroke at or over 300 mm, always use a guide rail to prevent side-load damage.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X200-75S FAQ
At 0.5 MPa it pushes 3927 N and pulls 3574 N. At 0.7 MPa it pushes 5497 N and pulls 5003 N. The theoretical maximum force is 801 kgf at 1.0 MPa. This 100 mm bore unit uses a G1/2 port and features a 33 mm adjustable air cushion at each end.
An external stop screw lets you shorten the extend stroke by up to 75 mm on-site. The nominal 200 mm stroke is the maximum, so your usable extend range is 125 to 200 mm. The retract end is fixed. This stop only sets the end position; it is not a load lock, so you need an external rod lock or pilot-operated check valve to hold a load on air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X200-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.