Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X225-10
The AirTAC JSIJ100~125 Adjustable Cylinder JSIJ100X225-10 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø100mm bore and 225mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke225 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X225-10
The extruded hard-anodized aluminum barrel omits tie rods entirely, making the body shorter and more compact than a same-bore ISO 15552 unit.
The JSIJ100X225-10 code means the 225 mm extend stroke can be shortened on-site by up to 10 mm via an external adjuster, letting you fine-tune the end position without swapping the cylinder. A G1/2 port feeds the 32 mm rod, and adjustable 33 mm air cushions decelerate the load at both ends. Because this SKU lacks the -S magnet, it cannot take a CMSE or DMSE sensor.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X225-10 Technical Specifications
| Model | Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X225-10 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 225 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 719 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X225-10
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X225-10 Is Used
Press Tonnage Trimming
Use the 10 mm extend adjuster to dial in the exact contact point on a light stamping press without shimming the tool.
Heavy Pallet Diverting
Pushes loaded pallets with 5497 N at 0.7 MPa, retracting smoothly via the 33 mm cushion after the divert cycle.
Is the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X225-10 the Right Cylinder?
The 10 mm adjustable window is ideal for synchronizing multiple actuators or sharing a spare across slightly different stroke variants. Mounting choices include FA, LB, TC, TCM1, and TCM2. For any stroke over 300 mm, always use a guide rail to prevent side-load damage. Note that a plain cylinder drifts on air loss; fit an external rod lock or pilot-operated check valve if you need to hold a suspended load.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X225-10 FAQ
This 100 mm bore cylinder pushes 3927 N and pulls 3574 N at 0.5 MPa. At 0.7 MPa it pushes 5497 N and pulls 5003 N. The theoretical maximum force is 801 kgf at 1.0 MPa. It uses a G1/2 port and a 32 mm rod with an M26x1.5 thread.
The nominal 225 mm extend stroke is the maximum. The external adjuster lets you shorten the extend stroke by up to 10 mm on-site, giving a usable range of 215-225 mm to fine-tune the end position. The retract end is fixed, and this stop is not a load lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X225-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.