Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X225-10S
The AirTAC JSIJ100~125 Adjustable Cylinder JSIJ100X225-10S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø100mm bore and 225mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke225 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X225-10S
The external stop screw lets you trim the extend stroke by up to 10 mm on site, yielding a usable 215 to 225 mm forward travel while the retract end remains fixed. You can fine-tune the endpoint without physically swapping the cylinder.
Built as a JIS-standard profile unit, the hard-anodized aluminum barrel makes it shorter and more compact than a same-bore ISO 15552 cylinder. The G1/2 port feeds the 32 mm rod, and the -S suffix means a built-in magnet is present for CMSE/DMSE sensors that mount directly into the side grooves.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X225-10S Technical Specifications
| Model | Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X225-10S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 225 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 719 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X225-10S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X225-10S Is Used
Press Stroke Tuning
Dial in the exact 215 to 225 mm clamping reach on a heavy press without machining new spacers, using the external adjuster to set the final contact point.
Multi-Size Diverting
Shift large packages on a sorting line by tweaking the extend endpoint 10 mm shorter on the fly to accommodate varying box widths without changing cylinders.
Pallet Stop Calibration
Secure heavy pallets by adjusting the stop position to compensate for mechanical wear, ensuring precise 225 mm maximum placement every cycle.
Is the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X225-10S the Right Cylinder?
The 10 mm extend-adjustment window is ideal when you need to synchronize multiple actuators or share a spare across slightly different stroke variants. Mounting choices cover Basic, FA, LB, TC, TCM1, and TCM2. Because the -S magnet is included, you can fit CMSE/DMSE reed or electronic switches. For any stroke at or above 300 mm, always use an external guide rail to absorb side loads and prevent rod binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X225-10S FAQ
At 0.5 MPa it pushes 3927 N and pulls 3574 N. At 0.7 MPa it pushes 5497 N and pulls 5003 N. The theoretical maximum is 801 kgf at 1.0 MPa. This 100 mm bore unit uses a G1/2 port and a 32 mm rod with an M26x1.5 thread.
The nominal 225 mm extend stroke is the maximum. An external stop screw lets you shorten the forward stroke by up to 10 mm on site, giving a usable range of 215 to 225 mm. The retract end is fixed. This stop only sets the end position; it is not a load lock, so use an external rod lock or pilot-operated check valve if you need to hold a load on air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X225-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.