Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X225-20S
The AirTAC JSIJ100~125 Adjustable Cylinder JSIJ100X225-20S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø100mm bore and 225mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke225 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X225-20S
The hard-anodized aluminum extruded barrel skips external rods entirely, while the G1/2 port handles the air volume needed for dynamic cycling.
The JSIJ100X225-20S uses an external stop screw to trim the extend stroke by up to 20 mm on site, giving a usable forward range of 205 to 225 mm without swapping the cylinder. The retract end remains fixed, and the stop simply fine-tunes the end position rather than locking the load. A built-in piston magnet feeds CMSE or DMSE switches mounted in the side grooves, and adjustable 33 mm air cushions at both ends absorb kinetic energy near the stroke limits.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X225-20S Technical Specifications
| Model | Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X225-20S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 225 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 719 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X225-20S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X225-20S Is Used
Press Clamping
Dial in the exact 205 to 225 mm clamping reach on-site to accommodate varying material thicknesses without re-engineering the fixture.
Is the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X225-20S the Right Cylinder?
When sizing this 100 mm bore actuator, compare it against the neighboring 80 mm and 125 mm options. The 20 mm adjustable window is ideal for sharing one spare cylinder across multiple fixtures that need slightly different extend endpoints. You can mount it via FA, LB, TC, TCM1, or TCM2 brackets. The integrated -S magnet supports electronic position sensing. For this 225 mm stroke, ensure external guide rails carry the payload to prevent side-loading damage to the rod seal.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X225-20S FAQ
This 100 mm bore cylinder pushes with 3927 N and pulls with 3574 N at 0.5 MPa. At 0.7 MPa it pushes 5497 N and pulls 5003 N. The theoretical maximum force is 801 kgf at 1.0 MPa. It uses a G1/2 air port, a 32 mm rod, and features 33 mm adjustable air cushions at both ends.
The nominal 225 mm extend stroke is the maximum length. An external stop screw lets you shorten the forward stroke by up to 20 mm on-site, yielding a usable extend range of 205 to 225 mm. The retract end is fixed. This stop only sets the end position; it does not hold the load on air loss, so use an external rod lock for vertical holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X225-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.