Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X225-50
The AirTAC JSIJ100~125 Adjustable Cylinder JSIJ100X225-50 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø100mm bore and 225mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke225 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X225-50
The hard-anodized aluminium barrel keeps the overall body shorter and more compact than a same-bore ISO 15552 unit, while the G1/2 port feeds the 32 mm rod.
The external stop screw provides a 50 mm on-site extend-shortening window, letting you dial in the usable stroke anywhere from 175 mm up to the 225 mm maximum without swapping the cylinder. Because this SKU lacks a magnet, it cannot take a CMSE or DMSE sensor; add the -S variant if you need position detection. Note that the adjustable cushion only decelerates the piston near the ends, so fit an external rod lock or pilot-operated check valve if the load must hold position on air loss.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X225-50 Technical Specifications
| Model | Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X225-50 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 225 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 719 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X225-50
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X225-50 Is Used
Press Tooling Adjustment
Dial in the exact 175 to 225 mm extend position on-site to accommodate different material thicknesses without machining new spacers.
Pallet Stopper Mechanism
Halts heavy pallets reliably using the adjustable end cushion, with the external screw allowing quick height changes for various pallet sizes.
Is the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X225-50 the Right Cylinder?
The 50 mm adjuster is ideal for sharing a single spare cylinder across several stroke variants or fine-tuning the end position after a tooling change. You can mount it via FA, LB, TC, TCM1, or TCM2 brackets. For a 225 mm stroke, always guide the load to prevent rod side-loading, and remember this no-magnet version cannot support sensing switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X225-50 FAQ
The theoretical maximum force is 801 kgf at 1.0 MPa. This 100 mm bore unit uses a G1/2 air port and a 32 mm piston rod.
The nominal stroke is 225 mm, which is the maximum extend length. An external stop screw lets you shorten the extend stroke on-site by up to 50 mm, giving a usable range of 175 to 225 mm. The retract end remains fixed, and this stopper sets the end position rather than locking the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X225-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.