Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X25-10
The AirTAC JSIJ100~125 Adjustable Cylinder JSIJ100X25-10 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø100mm bore and 25mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke25 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X25-10
The extruded hard-anodized aluminium barrel keeps the overall length shorter than a same-bore ISO 15552 cylinder, saving valuable machine space.
The external stop screw provides a 10 mm on-site extend-shortening window, letting you fine-tune the usable extend stroke down from the 25 mm maximum to 15 mm without changing the cylinder itself. Air connections use a G1/2 port, and adjustable air cushions at both ends decelerate the load smoothly. Note that this plain SKU lacks a magnet and cannot take a CMSE/DMSE sensor; for the switch set you need the -S variant.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X25-10 Technical Specifications
| Model | Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X25-10 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 25 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 719 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X25-10
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X25-10 Is Used
Press Fit Tuning
Dial in the exact 15 to 25 mm pressing depth for bearing insertion using the external adjuster, ensuring perfect seating without swapping actuators.
End-Stop Calibration
Provides a hard mechanical stop for clamping parts, allowing operators to back off the extend position by up to 10 mm to prevent workpiece deformation.
Is the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X25-10 the Right Cylinder?
The 10 mm adjuster is ideal for sharing a spare across slightly different short-stroke variants and tuning the final end position on-site. Mounting options include FA, LB, TC, TCM1, and TCM2 brackets. Because this is a no-magnet SKU, position sensing is unavailable here. Even at this short 25 mm stroke, ensure adequate guide support to absorb any side loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X25-10 FAQ
The theoretical maximum force is 801 kgf at 1.0 MPa.
The nominal 25 mm extend stroke is the maximum. The external adjuster lets you shorten the extend stroke on-site by up to 10 mm, giving a usable extend range of 15 to 25 mm. The retract end is fixed, and the stop only sets position, it does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X25-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.