Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X25-10S
The AirTAC JSIJ100~125 Adjustable Cylinder JSIJ100X25-10S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø100mm bore and 25mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke25 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X25-10S
The hard-anodized aluminum extruded barrel skips external rods entirely, keeping the body smooth. A built-in piston magnet (-S) lets you drop CMSE or DMSE reed and electronic switches directly into the side grooves for precise position detection.
The JSIJ100X25-10S uses an external stop screw to shorten the extend stroke on site by up to 10 mm, giving a usable forward travel of 15 to 25 mm while the retract end stays fixed. This lets you fine-tune the end position without swapping the cylinder. Pneumatic connections use a G1/2 port, and adjustable air cushions at both ends absorb the 33 mm cushion stroke to protect the mechanism.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X25-10S Technical Specifications
| Model | Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X25-10S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 25 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 719 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X25-10S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X25-10S Is Used
Short-Stroke Pressing
Drives a 200 kg vertical pressing head, using the 10 mm adjuster to dial in the exact 15 to 25 mm crush depth on different material batches.
Pallet Stop Block
Halts heavy pallets on a roller line, using the external stop screw to tune the blocking position without removing the cylinder from the frame.
Is the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X25-10S the Right Cylinder?
Size this 100 mm bore against the 80 mm and 125 mm options by checking your force margins. The 10 mm adjustable window is ideal when you need to share a single spare cylinder across machines that need slightly different 15 to 25 mm extend end positions. Mounting choices cover Basic, FA, LB, TC, TCM1, and TCM2 brackets. The -S suffix means the magnet is already inside for CMSE/DMSE sensors. Even at this short 25 mm stroke, always guide the rod end to prevent side-load damage.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X25-10S FAQ
At 0.5 MPa it pushes 3927 N and pulls 3574 N. At 0.7 MPa push is 5497 N and pull is 5003 N. The theoretical max force is 801 kgf at 1.0 MPa. It has a 32 mm rod, M26x1.5 rod thread, G1/2 port, and 33 mm adjustable cushions at both ends.
The nominal 25 mm extend stroke is the maximum travel. The external stop screw lets you shorten that forward stroke by up to 10 mm on site, giving a usable extend range of 15 to 25 mm. The retract end is fixed, and this stop only sets position—it does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X25-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.