Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X250-10S
The AirTAC JSIJ100~125 Adjustable Cylinder JSIJ100X250-10S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø100mm bore and 250mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke250 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X250-10S
The extruded hard-anodized aluminium barrel omits tie rods entirely, leaving a clean profile that is physically shorter and more compact than a same-bore ISO 15552 unit. A G1/2 port feeds the chambers, while adjustable air cushions of 33 mm at each end absorb the impact of heavy moving masses.
The -10 code means an external stop screw lets you shorten the extend stroke on-site by up to 10 mm, giving a usable forward travel of 240 to 250 mm without swapping the cylinder. Because this SKU includes the -S magnet, you can drop CMSE or DMSE reed and electronic switches straight into the side grooves for exact end-position detection.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X250-10S Technical Specifications
| Model | Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X250-10S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 250 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 719 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X250-10S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X250-10S Is Used
Press Fit Tuning
Dial in the exact bottoming position of a 200 kg press fit within a 10 mm window without machining a new hard stop.
Shared Spare Actuator
Keep one cylinder on the shelf and adjust the extend stroke from 240 to 250 mm to service multiple transfer stations.
Pallet Stop Adjustment
Fine-tune the retract stop face for varying pallet widths on a heavy 100 mm bore packaging line.
Is the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X250-10S the Right Cylinder?
The 10 mm adjustable window is ideal for sharing one spare cylinder across several stroke variants or fine-tuning a hard stop on the machine. You can mount it via basic, FA, LB, TC, TCM1, or TCM2 brackets. Since the 250 mm stroke exceeds 300 mm only marginally, keep the load guided to prevent side-load wear on the 32 mm rod and M26x1.5 thread. The -S magnet equips it for CMSE/DMSE sensors; a plain no-S SKU cannot take a sensor at all.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X250-10S FAQ
At 0.5 MPa it pushes 3927 N and pulls 3574 N. At 0.7 MPa it pushes 5497 N and pulls 5003 N. The theoretical maximum is 801 kgf at 1.0 MPa. It uses a G1/2 port.
An external stop screw lets you shorten the extend stroke on-site by up to 10 mm, giving a usable forward travel of 240 to 250 mm. The nominal 250 mm stroke is the maximum, and the retract end is fixed. The stop sets the end position; it is not a load lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X250-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.