Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X400-40
The AirTAC JSIJ100~125 Adjustable Cylinder JSIJ100X400-40 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø100mm bore and 400mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke400 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X400-40
Its extruded hard-anodized aluminium barrel omits tie rods, making the overall body shorter and more compact than a same-bore ISO 15552 unit. The G1/2 port feeds the chamber efficiently to maintain smooth motion across the 30-800 mm/s speed range.
The external stop screw provides a 40 mm on-site extend-shortening window, letting you fine-tune the end position from 360 to 400 mm without swapping the cylinder. Note that this plain SKU lacks a magnet and cannot take CMSE/DMSE sensors, and the air cushion only decelerates the load rather than holding it on air loss.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X400-40 Technical Specifications
| Model | Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X400-40 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 400 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 719 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X400-40
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X400-40 Is Used
Press Stroke Tuning
Dial in the exact 360 to 400 mm clamping reach on a heavy press without machining new hard stops.
Heavy Divert Arm
Adjust the extend endpoint on-site to clear different pallet widths before locking the position.
Is the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X400-40 the Right Cylinder?
The 40 mm adjustable window is ideal for sharing a spare across stroke variants or finalizing end positions on-site. JSIJ mounting options include FA, LB, TC, TCM1, and TCM2. Because this is a non-magnet SKU, position sensing is unavailable. For the 400 mm stroke, always use external guides to prevent rod bending under side loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X400-40 FAQ
At 0.5 MPa it pushes 3927 N and pulls 3574 N. At 0.7 MPa it pushes 5497 N and pulls 5003 N. The theoretical maximum force is 801 kgf at 1.0 MPa.
The external adjuster lets you shorten the extend stroke by up to 40 mm on-site, giving a usable range of 360 to 400 mm. The nominal 400 mm stroke is the maximum, and the retract end remains fixed.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X400-40
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.