Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X50-50
The AirTAC JSIJ100~125 Adjustable Cylinder JSIJ100X50-50 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø100mm bore and 50mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke50 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X50-50
The hard-anodized aluminum barrel keeps the overall body shorter and more compact than a same-bore ISO 15552 unit. Air connects via a G1/2 port.
The JSIJ100X50-50 features an external stop screw that lets you shorten the extend stroke on-site by up to 50 mm. The nominal 50 mm stroke is the maximum, giving you a usable extend range of 0-50 mm, while the retract end remains fixed. This mechanism allows fine-tuning of the end position without swapping the cylinder. Note that this specific SKU lacks a magnet, so it cannot take CMSE or DMSE sensors.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X50-50 Technical Specifications
| Model | Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X50-50 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 50 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 719 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X50-50
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X50-50 Is Used
Press Fit Tuning
Adjust the extend stroke on-site to set precise pressing depths for bearing insertion without changing the cylinder setup.
Variable Stopper Arm
Act as a heavy-duty stopper on a conveyor line, tweaking the 0-50 mm extend window to accommodate different product sizes.
Pallet Positioning
Push pallets into a specific alignment zone, using the external adjuster to dial in the exact end position for various pallet widths.
Is the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X50-50 the Right Cylinder?
The 100 mm bore provides 5497 N at 0.7 MPa, making it ideal for medium-heavy loads. The adjustable stroke feature is perfect for sharing a spare cylinder across multiple stroke variants or fine-tuning end positions on-site. Mounting options include FA, LB, TC, TCM1, and TCM2 brackets. Because this is a non-magnetized SKU, you cannot mount position sensors; choose an -S variant for CMSE/DMSE switches. For any stroke length, always guide the load to prevent side-load damage to the rod seal.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X50-50 FAQ
This 100 mm bore cylinder uses a G1/2 port and a 32 mm piston rod. It features adjustable air cushions of 33 mm at both ends.
The external stop screw lets you shorten the extend stroke by up to 50 mm on-site. The nominal 50 mm stroke is the maximum, so the usable extend range is 0-50 mm, while the retract end stays fixed. This stop only sets the end position and does not lock the load; for load holding on air loss, use an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X50-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.