Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X500-10S
The AirTAC JSIJ100~125 Adjustable Cylinder JSIJ100X500-10S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø100mm bore and 500mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke500 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X500-10S
The hard-anodized aluminum barrel keeps the overall body shorter and more compact than a same-bore ISO 15552 unit, while the G1/2 port feeds the 32 mm piston rod.
An external stop screw lets you trim the extend stroke by up to 10 mm on site, giving a usable 490 to 500 mm forward travel without swapping the actuator. The retract end remains fixed, and the built-in magnet works with CMSE/DMSE sensors for position feedback.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X500-10S Technical Specifications
| Model | Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X500-10S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 500 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 719 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X500-10S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X500-10S Is Used
Press Clamping
Dial in the exact 490 to 500 mm clamping reach via the external adjuster to accommodate varying material thicknesses without reprogramming the machine.
Is the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X500-10S the Right Cylinder?
The 10 mm extend window is highly useful for fine-tuning end positions on shared machinery or keeping a single spare across slight stroke variants. You can mount it via FA, LB, TC, TCM1, or TCM2 brackets. Because the stroke is 500 mm, always use an external guide to prevent rod bending under side loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X500-10S FAQ
The theoretical maximum force is 801 kgf at 1.0 MPa. This 100 mm bore unit uses a G1/2 air port and a 32 mm rod with an M26x1.5 thread.
The nominal 500 mm stroke is the maximum. An external stop screw lets you shorten the extend stroke on site by up to 10 mm, yielding a 490 to 500 mm usable forward range, while the retract end stays fixed. This stop only sets the end position; it is not a lock. A plain cylinder drifts on air loss, so use an external rod lock or pilot-operated check valve for load holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X500-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.